Snow Equipment Owning/Operating Pictures of your snow weapons

[mattridessleds]

Mattridessleds, just curious but do you think only one piece of angle (slotted piece) is enough to support the plow? I wonder if you might want to add one or two more pieces to add stability to your setup, which by the way you did a very nice job.

We'll see how it goes. That slotted piece is about 3/8 thick it is actually the old jack stand to the plow that got cut at the angle to make it fit there. Debated about just rigging up the chain like it would be on the plow if it was on a pickup but so far i used it the otherday to grade the driveway a little just for kicks and I like being able to move the plow in 6 directions and being able to put down pressure on it. The bottom is welded all the way around that rectangular metal piece I think it will hold up. If not i'll add some gussets or something later.
-matt

 

[46andtool]

B2320
318

 

[PILOON]

Here is my rig.
Mitsubish MT180D, 60"Bervac blower and home made 60" pusher blade.
Heated cab is also 'artisan'.

 

[D7E]

so many threads on this subject cant remember if i posted to this one ..!

 

[andrehoude]

I've been holding off on showing my winter setup as I was waiting to receive my new snow pusher. While I like the snow blower for long runs, I really prefer a front plow for the large parking areas.

You'll notice I have the Pull-type blower where you drive over the snow and the blower scrapes up and blows it out of the way. It saves on the neck strain and cleans up the driveway really well.

We just got our first snow around Georgian Bay and you can see the ground isn't yet frozen. I've got the skid shoes set up as high as possible to save the gravel but it's so much easier once everything's frozen up.

Have a good season everyone!

John

How much did that snow pusher cost and what brand
Thanks. Andre

 

[Diamondpilot]

new set up - it will probably never snow again!
I also switch from turfs to loaded ags and it has all kinds of traction

I love my Ag's in the snow. You will wonder why you lived without them this long.

Chris

 

[R_Walter]

This works for me more or less

 

[rayclar]

This is what i use, sorry i don't have a pic yet with plow and blower on at the same time.

 

[IXLR8]

I prefer using this over my tractor for snow removal.

I have one of those as well, much easier for the wife to use when I am out of town. Truck to clean up the majoriy and the tractor, w/FEL and rear blade, to clean up after.

 

[Wyld Bill]

Here's mine.

2006(?) Mahindra 2615 HST.
2-link tire chains.
Loaded tires.
Wheel spacers (for chains).
Provonost Lynx 70" rear snowblower with electric chute rotator
Origonal Cab Co. soft cab with heat, dome light, cup holder, tunes, etc.
Works great I just wish I had a bit more PTO HP.

 

[freddyr]

my kabota, next year a front blade for the little 2" snows:thumbsup:

 

[Timber]

It is that time of the year again, mine are the same since I started the thread

 

[spudbud]

Here is my 955 with front blade. Nothing like waiting until mid December to get it ready. No snow yet here in Iowa but I'm sure it will come eventually. Still have to finish installing rear chains.

 

[jb62901]

Still waiting for the snow here in S W Mi. All dressed up and nothing to do.

http://oi56.tinypic.com/2rfwwnm.jpg

 

[DK35vince]

I'm ready. Now we need some snow.

 

[RRDeere]

Here is mine, all set up with the new to me, 48" LuckNow snowblower. Now if it will just SNOW!

 

[Mercmaniac]

Here are mine: JD 2520 with 54" snowblower and V bar chains
JD 445 with 47" snowblower (54" blade not in pic)

 

[ernemats]

Still waiting for that snow but my snow removal machines are ready to go.

 

[grsthegreat]

Still waiting for that snow but my snow removal machines are ready to go.

that picture looks like the middle tractor has a satellite dish on it....does it have a TV haha:laughing:

 

[ernemats]

Afraid not .