Newbe MF 202

[richn]

I recently purchased a MF 202 industrial with a loader. The rims are badly rusted. They are 24 in (14.9x24) with dual bevels the center clamps to one of the bevels. I got a pair of 6 loop rims but the loop holes are off about an inch (about 20 1/4, I need about 19 1/4). Does anyone know if the dual bevel rims are avalible ? Are the loop stlyle rims made with 19 1/4 spacing ?

Also what is the proceedure for romoving the loader ?

Thanks for your help

 

[JerryG]

I recently purchased a MF 202 industrial with a loader. The rims are badly rusted. They are 24 in (14.9x24) with dual bevels the center clamps to one of the bevels. I got a pair of 6 loop rims but the loop holes are off about an inch (about 20 1/4, I need about 19 1/4). Does anyone know if the dual bevel rims are avalible ? Are the loop stlyle rims made with 19 1/4 spacing ?

Also what is the proceedure for romoving the loader ?

Thanks for your help

Can't answer your question about the loops. Taking the loader off is a bear. Everything is bolted as it is meant to be an integral part of the tractor. Unless you don’t plan on ever using the loader again, I would suggest that you leave it on.

 

[m7040]

I only took the loader off on my MF203 when overhauling the engine. It was quite a job to do with jacks and chainfalls. Not easy to do.