New Welding Forum

   / New Welding Forum #1  

Muhammad

Administrator
Moderator
Joined
Mar 21, 1998
Messages
20,655
Location
San Diego, CA
Tractor
None currently
We just opened the new forum for welding. There were lots of welding-specific threads dotted around the forums, so I think this will be a nice way to organize them. :)
 
   / New Welding Forum #3  
Yup pretty cool, couldn't believe my eyes when I was scrolling down through the general forums and saw WELDING.
Welding really is an integral part of the tractoring experience, I could almost guarantee anyone who owns a tractor will also need things welded from time to time, some of them every other day.

There's alot of talk about generators, don't know if it's enough to justify another forum. maybe if it was combined with alternate energy and energy conservation etc ?

JB.
 
   / New Welding Forum #4  
Should I buy a mig or a stick and what kind? Can I use a 14 guage extention cord to run it 1,500 feet to my barn to weld something in the hayloft? :laughing:
 
   / New Welding Forum #5  
Should I buy a mig or a stick and what kind? Can I use a 14 guage extention cord to run it 1,500 feet to my barn to weld something in the hayloft? :laughing:

I would get at a 250 amp stick machine on the end of that cord!!:D
 
   / New Welding Forum #6  
Should I buy a mig or a stick and what kind? Can I use a 14 guage extention cord to run it 1,500 feet to my barn to weld something in the hayloft? :laughing:
If you're going to do that do it safely - make sure you wear a dust mask climbing around in the hay loft.


P.s. Let me add my thanks for adding the welding topic.
 
Last edited:
   / New Welding Forum #7  
We just opened the new forum for welding. There were lots of welding-specific threads dotted around the forums, so I think this will be a nice way to organize them. :)

Thanks. It's great to have all these welding threads gathered up into one place.
 
   / New Welding Forum #10  
If you're going to do that do it safely - make sure you wear a dust mask climbing around in the hay loft.

Hay dust is as explosive as gas. Make sure there is not dust in air or preferably wet the area before you strike the arc.
I was installing temperature measurement at a grain silo many years back. They hired husband and wife to maintain the silo clean specifically sweep the grain dust. I was there when they were instructed in no circumstances to smoke while doing it. The silo exploded next day just after we left the work. Several people were killed. The guy lit up while sweeping the dust on top of the silo.

I also copied this post to Welding forum.
 

Tractor & Equipment Auctions

2012 INTERNATIONAL DURASTAR 4400 SBA 6X4 WATER TRU (A51247)
2012 INTERNATIONAL...
(APPROX 20) 2" X 3" X 49" THICK TUBING (A51247)
(APPROX 20) 2" X...
2004 IC Corporation 3000IC School Bus (A51692)
2004 IC...
2017 Claas Jaguar 860 Forage Harvester (A53472)
2017 Claas Jaguar...
2016 JLG ECOLIFT 70 SELF PROPELLED MANLIFT (A51246)
2016 JLG ECOLIFT...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top