metalbender
Veteran Member
Pretty pumped, going tomorrow to pick up a Tumblebug type scraper.
New Toy
- Thread starter metalbender
- Start date
- Views: 1777
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,074
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
The collection attachments begins. 
i7win7
Veteran Member
Tumblebug Rotary Scraper Moving Dirt - YouTube
Never heard of tumblebug. Not sure I'd call it a "NEW" toy? Looks very functional for drawbar tractors. I'll stick with those new fangled box blades.
Never heard of tumblebug. Not sure I'd call it a "NEW" toy? Looks very functional for drawbar tractors. I'll stick with those new fangled box blades.
That's pretty slick to play with. Here's another video with a very good explanation of the controls and use. Tumblebug Rotary Scraper Operation, Adjustment, and Demonstration - YouTube
OP
metalbender
Veteran Member
New to me. Bigger than what it seems in the FB ad. Old, square nuts and bolts. Only found one picture of the same kind. Darn heavy, had to put on my counterweight. Drum is 30 inches dia, 60 inches long will be a while before I get a chance to figure it out.
OP
metalbender
Veteran Member
More searching leads me to believe this is a Killefer manufactured unit. Found a video of one behind a small crawler.
Gordon Gould
Super Member
- Joined
- Apr 1, 2007
- Messages
- 6,632
- Location
- NorthEastern, VT
- Tractor
- Kubota L3010DT, Kubota M5640SUD, Dresser TD7G Dozer
Really enjoyed those videos. Never seen one of those work before. Pretty interesting piece of equipment. Have fun moving some dirt!!!!
gg
gg
OP
metalbender
Veteran Member
Ya, saw those vids a while ago. Thought it was a neat attachment. Never thought I'd ever see one around here. When I spotted the ad, had to jump on it, even if it needed some fixing. Metal is my thing. For $100 and just over an hr drive, couldn't pass it up. Found a partial brass tag riveted on, all that's left says Richard. Some hisrorical stuff from California has an old pic of a guy sitting in one of these, 2 1/2 yrd model. The linkage assembly on the hookup to pull is the same as on mine. Still searching for info of course.
We never would have know that, based on your username. :laughing:
That looks like a unique attachment, you will have some fun figuring it out and using it. Please post some before and after pics or some video.
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,579
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
You'll definitely know you have it on behind you,when it hooks in. We had 2 different one's years ago. You can move a lot of dirt with them, if you stay with it.
I'm one step above the tumblebug, with this Overland Scraper, made in California. Supposedly made for the N series Fords. Not sure I'd want to pull it with and N series, unless it lots of front ballast. I've pulled the front wheels off the ground on the Massey 180 I had, when I've hooked a rock.
I'm one step above the tumblebug, with this Overland Scraper, made in California. Supposedly made for the N series Fords. Not sure I'd want to pull it with and N series, unless it lots of front ballast. I've pulled the front wheels off the ground on the Massey 180 I had, when I've hooked a rock.
![DSC01007[1].JPG](/forums/data/attachments/135/135402-30e972489e532eac53890bd233c523cb.jpg)
