Box Scraper 5' or 6' Box Scraper on a New Holland T1520

[Lower40]

My NH T1520 (35hHP) has industrial tires and the rear trac width is just a hair over 5 foot. Just want to use for dressing up my Jeep trail and ATV's.

I'm leaning toward the 6' unit but would like to hear some feedback from other scraper owners.

 

[RjCorazza]

I would think the 6' would be a good match. Even a 4' box blade is capable of anchoring much larger machines under the right conditions.

 

[oldnslo]

Is there any concern on getting between trees along the trails? If not normally having blade a little wider than the tractor is desirable.

 

[tacticalturnip]

I would go with the 6' box, for sure.

 

[KCTractors]

My NH T1520 (35hHP) has industrial tires and the rear trac width is just a hair over 5 foot. Just want to use for dressing up my Jeep trail and ATV's.

I'm leaning toward the 6' unit but would like to hear some feedback from other scraper owners.

I would go with a 6 foot.

 

[Lower40]

Thanks to all...will be going with a 6' for sure. Don't have an obstacle course pretty much directly out to my firing ranges and back. Now I need to locate one at a decent price...the prices sure went up from 10 years ago

 

[nyone]

Look on marketplace. I have had the same 6' on a 19hp to 40hp. The 19hp just didnt like to many of the scarifiers dropped as much as the 40hp.