New New Holland

[James Mason]

Actually after I first got it They came out to do a couple things. Havnt really needed anything I couldnt handle myself

Recently (3 years later) I had a couple issues and needed a couple parts installed. I called and had them order parts. When the parts came in they called. If they were to come out I would have to set a date. My option would be if I would bring it in to them they would fix it right away while I was waiting.
Since we go to "town" about once a month I put it on the trailer and dropped it off while we were getting supplies. They called a couple hours later and it was done. Very nice people to work with.
The X has been pretty much flawless. Made in Italy

so... If I was stranded and they had to come right out....maybe I would have to pay travel time (2hrs) If it were at their convenience ...I dont know.

Sounds like a great outfit. My dealer Ocala Tractor won't lift a finger for less than $400.

 

[Have tractor did travel]

ferling - the link you provided had a great explanation of where all New Holland is made- ag equipment, tractors, etc. If you'll read about 1/3 of the way down the page, you'll see Turkey is headquarters for Light Series Tractors (whatever that means, but I suppose 60 hp tractors)

TürkTraktör

Türkiye’nin üretim öncülerinden TürkTraktör, endüstriyel hayatına 1954 yılında başlamış ve yıllar içerisinde yükselen bir grafikle, bugün gelinen noktada başta Amerika kıtası olmak üzere şimdiye kadar 130’dan fazla ülkeye yaptığı ihracatla ülkemizin önemli kuruluşlarından biri olmuştur.

www.turktraktor.com.tr

 

[James Mason]

so, I finally got a chance to spend some time looking at wiring under the seat and around the axle. there are a bunch of fairly loose wires with connections. they get pretty beat up and dirty when pulling a mower. I pulled and prodded all that I could see including the one that leads up under the seat. Then I tried it and it started up as normal. so, I guess it comes down to a loose connection. I'll clean and secure better than the factory did and hopefully solve the problem.

A very odd thing happened today. I noticed I had received a call from the dealer on my cell phone. No message was left. However, I had not yet called them. I wonder if some New Holland person monitors these conversations?

 

[James Mason]

You have to adjust the seat tension or put some lead in your ass. Or the best solution is to find someone that knows how to “bypass” that problem. When your warranty no longer exist you can fine tune that tractor to act like you want it to act. Wear your seat belt if you have a problem with staying in seat. Also under the clutch pedal (left foot floor rest is a bunch of wires / connections. Make sure they are not covered with dirt / mud or any connections being loose. New tractors have a lot of electronics. Greatest thing since brown sugar but when it quits working it is one more pain in the arse.

Thanks - See my fix in another post. Exactly-loose wiring. P.S. I used to live on the old Firestone Farm.

 

[Torvy]

I wonder if some New Holland person monitors these conversations?

If they don't, I would be more surprised.... I doubt it would have lead to a call, but most major companies have departments tasked with monitoring social media...or they contract it out.

I hope it all work out for you.

 

[FERLING]

so, I finally got a chance to spend some time looking at wiring under the seat and around the axle. there are a bunch of fairly loose wires with connections. they get pretty beat up and dirty when pulling a mower. I pulled and prodded all that I could see including the one that leads up under the seat. Then I tried it and it started up as normal. so, I guess it comes down to a loose connection. I'll clean and secure better than the factory did and hopefully solve the problem.

A very odd thing happened today. I noticed I had received a call from the dealer on my cell phone. No message was left. However, I had not yet called them. I wonder if some New Holland person monitors these conversations?

Get some silicone spray made for electrical connections that helps waterproof connections. CRC 1003200 | Crescent Electric Supply Company

 

[FERLING]

Get some silicone spray made for electrical connections that helps waterproof connections. CRC 1003200 | Crescent Electric Supply Company

If your living depends on it you better have a way to pick up good and bad reviews on the internet. If you don’t want it repeated please don’t put it on the internet.

 

[FERLING]

Thanks - See my fix in another post. Exactly-loose wiring. P.S. I used to live on the old Firestone Farm.

You have just learned a valuable lesson in modern technology. Don’t be afraid to ask and pray you’re not the first one to have this problem. Hope someone else has corrected it in their past and is willing to past the solution on.
Remember if someone is monitoring these sites it’s for picking knowledge from those that corrected problems. That dealer may sell a couple cans of silicone electrical waterproofing (at an unreal marked up price) just because of your comments.

 

[SmallChange]

Remember first 50 hour service on New Holland (Workmaster 50/60/70) only requires oil change / filter and fuel filter change.

Really? My Workmaster 25 service at 50 hours also requires hydraulic filter change. Per an earlier thread here, my inexperience with changing the filter meant the service also wound up requiring hydraulic fluid change, which was by far more expensive than the rest of the service. The dealer was kind enough not to laugh at me when I came back for the fluid. Or at least wait until I had left.

About the seat safety switch -- I had a lot of trouble with mine. It would keep killing the engine when I would change my posture in the seat. Craning my neck to see the bucket edges, leaning to check rear clearance, reaching forward to set the parking brake, whatever. I finally gave up and plugged in a jumper instead. Note, I will only start or move the tractor if I have the seat belt fastened, so I'm not doing anything dangerous here. It's just a much-too-touchy switch.

And I really mean that! I read a story somewhere, maybe here, in which somebody started their tractor in the barn or garage and it started moving forward when they didn't expect it to. And the folding ROPS, which wouldn't fit under the beams, had been put back up after parking it for some reason, so the ROPS contacted the beam. The tractor flipped itself in the barn. All it was supposed to do was start warming up. Well, I can't promise I won't do that, but I can promise I'll stay in the seat if I do.

 

[CausticUrbanCoast]

Really? My Workmaster 25 service at 50 hours also requires hydraulic filter change. Per an earlier thread here, my inexperience with changing the filter meant the service also wound up requiring hydraulic fluid change, which was by far more expensive than the rest of the service. The dealer was kind enough not to laugh at me when I came back for the fluid. Or at least wait until I had left.

About the seat safety switch -- I had a lot of trouble with mine. It would keep killing the engine when I would change my posture in the seat. Craning my neck to see the bucket edges, leaning to check rear clearance, reaching forward to set the parking brake, whatever. I finally gave up and plugged in a jumper instead. Note, I will only start or move the tractor if I have the seat belt fastened, so I'm not doing anything dangerous here. It's just a much-too-touchy switch.

The seat sensor is actually just to stop kids from operating the tractor.

Either they are not heavy enough to trigger it or they have to get off the seat to reach the peddles.

Long before keys were required, seat switches existed. Even now there is pretty much only one key pattern for each manufacturer.