dcarroll
New member
Need help on how to replace worn out belts on 66 inch Swisher trail mower
Need help replacing belts
- Thread starter dcarroll
- Start date
- Views: 806
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,732
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
check for your model number and download the manual here - Search Results
Stimw
Elite Member
If you go with generic belts make sure they are Kevlar.
Regular belts don't hold up to punishment on lawn equipment.
Regular belts don't hold up to punishment on lawn equipment.
Uncle Lar
New member
I've had the 66 inch since they first came out. The belt I had a tough time replacing at first was the drive belt. Wasnt enough clearance for the belt to go
under the engine shaft. Trick is to loosen the 2 bolts on the plate the engine sits on, and pry the plate up a tad. The bolt holes are elongated for this. I use swisher belts, haven't found 133 in belts anywhere else.
lar
under the engine shaft. Trick is to loosen the 2 bolts on the plate the engine sits on, and pry the plate up a tad. The bolt holes are elongated for this. I use swisher belts, haven't found 133 in belts anywhere else.
lar
