narrow front to wide front?

[Anonymous Poster]

How difficult is it to go from a narrow front end to a wide front end. I am looking at an older Farmall. 1951 Farmall H.

Thanks
Ken H.

 

[thcri]

Ken,

You are starting to make it impossible to follow you as you keep changing posts. Anyway before I bought the H, I sure would look around at a few junk yards to see if you can even get a wide front end. I know of no kit out there to convert one. But I am sure you can convert by purchasing a wide front from a junk yard. Mayby asking someone in the anitiques posting would help you. The other thing I would be concerned about and again following your post I believe the H will be awfully big or should I say clumsy for what your looking to do. The frame on that tractor was large and the clutch was a pain. I just am not sure you would be happy with it.

just my 2 pennies

murph

 

[Taylortractornut]

Dad used to redtore old Allis Chalmers tractors here we had a friend of our that helped us make new factory looking wide front ends One thing about the H is i thing the pump ran off the trans which made it like and *n when you clutched it you lost power to the hydraulics.

 

[Anonymous Poster]

Sorry. /forums/images/graemlins/smile.gif
Yes, it was way to big for the mowing that I want to do.
I think I will just start one post in the buying forum and stick to that. Just so many choices.

Ken H.

</font><font color="blue" class="small">( Ken,

You are starting to make it impossible to follow you as you keep changing posts. Anyway before I bought the H, I sure would look around at a few junk yards to see if you can even get a wide front end. I know of no kit out there to convert one. But I am sure you can convert by purchasing a wide front from a junk yard. Mayby asking someone in the anitiques posting would help you. The other thing I would be concerned about and again following your post I believe the H will be awfully big or should I say clumsy for what your looking to do. The frame on that tractor was large and the clutch was a pain. I just am not sure you would be happy with it.

just my 2 pennies

murph )</font>

 

[RobertN]

You can find wide front parts on ytmag.com classifieds. There are wide fronts for H's and M's there frequently.

It is a big tractor for mowing... A Farmall "A" with a 5" belly or pull mower would be good for mowing....

 

[Anonymous Poster]

H does not have live hydraulics or pto.

You would need to find a used wide front end, which is often about 1/3 the price of an H to begin with.....

--->Paul