My way

n8586m · Sep 25, 2008

I though I would share how I handled the trailer situation. The tractor is a Kubota B2620, with filled tires it weights about 2000 lbs, MMM is about 300 lbs and loader is another 600 lbs, total is 2900. The trailer is a 7k by 16' tandem that weights 1300 lbs. The sides I built are 5/4 x 6 treated deck boards, about another 300 lbs so the trailer is 1600. Total load is then 4500. The truck is rated at 5000 for the trailer load. After a few hundred miles it seems lake a fine match. Notice the aluminum ramps. Very light but rated for 5000 lbs. They are Dambach's costing about $200 delivered. The rear support is obvious and if trailer settles on it, just drive ahead 3'. There a lot of ways to rig your trailer but this works for me.

powerstroke444e · Oct 1, 2008

Looks like a nice set up that is easy on fuel

Egon · Oct 1, 2008

Nice work.

john_bud · Oct 1, 2008

For trailer support I use jack stands that have the handle you lift up to release. Works slick.

jb

wkpoor · Oct 5, 2008

I had a set of ramps once upon a time like those you have only they were in steel. The very first time I used them was to load a Chrysler shadow (very small car). As soon as the car front tires were midpoint on the ramps they fell to the ground in a crumpled mess. I think the ratings are a little miss leading. I would be careful and maybe block the center of them. They are really designed for lawnmowers and ATV's.