MT1601D hydraulics

/ MT1601D hydraulics #1  

bigcheese

New member
Joined
Jun 27, 2006
Messages
6
Location
Ferris, Texas
Tractor
Mitsubishi MT1601D
Messed up and left tractor out in hard rain, transmission shifter boot is torn and water contaminated hydraulic oil. Drained and flushed system twice, but cannot get hydraulics back up and working other than implement lift will raise slowly, used to raise fast. Did I mess up the pump too? Have flow but no high pressure.
 
/ MT1601D hydraulics
  • Thread Starter
#3  
Yes, mine uses standard hydraulic oil in the trans which is the hydraulic resorvoir.
 
/ MT1601D hydraulics #4  
You've probably got air in the system and you'll have to work the control valve some more to bleed it off. If you don't have a loader installed, use 80 wt gear oil. The shift boot is cheaper that the oil you've bought. Email me for a quote. Bill - satohparts.com.
 

Marketplace Items

Pallet of Two Pivot Wheels & Tires (A62177)
Pallet of Two...
2021 Land Pride RCF2072 6ft. Rotary Brush Cutter Tractor Attachment (A61572)
2021 Land Pride...
2025 PJ CC162 T/A 16FT EQUIPMENT TRAILER (A59912)
2025 PJ CC162 T/A...
159116 (A60430)
159116 (A60430)
2006 Honda Odyssey Van (A61574)
2006 Honda Odyssey...
BALDOR INDUSTRIAL 15 HP MOTOR (A64281)
BALDOR INDUSTRIAL...
 
Top