MT1601D hydraulics

/ MT1601D hydraulics #1  

bigcheese

New member
Joined
Jun 27, 2006
Messages
6
Location
Ferris, Texas
Tractor
Mitsubishi MT1601D
Messed up and left tractor out in hard rain, transmission shifter boot is torn and water contaminated hydraulic oil. Drained and flushed system twice, but cannot get hydraulics back up and working other than implement lift will raise slowly, used to raise fast. Did I mess up the pump too? Have flow but no high pressure.
 
/ MT1601D hydraulics
  • Thread Starter
#3  
Yes, mine uses standard hydraulic oil in the trans which is the hydraulic resorvoir.
 
/ MT1601D hydraulics #4  
You've probably got air in the system and you'll have to work the control valve some more to bleed it off. If you don't have a loader installed, use 80 wt gear oil. The shift boot is cheaper that the oil you've bought. Email me for a quote. Bill - satohparts.com.
 

Marketplace Items

SKIDDED PLAIN/WASTE WATER TANK (A60736)
SKIDDED...
2006 INTERNATIONAL L9227(INOPERABLE) (A60736)
2006 INTERNATIONAL...
2012 MACK CHU (PINNACLE) (A60736)
2012 MACK CHU...
2011 SHOP MANIFOLD TRAILER (A58214)
2011 SHOP MANIFOLD...
2012 Toyota Camry Sedan (A61569)
2012 Toyota Camry...
2014 NISSAN NV 3500 4X2 CARGO VAN (A59906)
2014 NISSAN NV...
 
Top