Makeshift Temporary Anti-rotate For 3PH Drawbar

[dstig1]

Like Xfaxman said... Though I do like some of those simple brackets people made. Those are pretty slick.

 

[Handloader109]

Your "real" drawbar is right behind that bar. Just chain to it with enough slack to allow you to lift, perhaps

Yep, you might have a bar, but it isn't a draw bar when on a 3 point hitch.
Use the real one when towing...zero reason not to

 

[Handloader109]

But then you’d have to manually operate the trailer jack. If done properly using the 3 ph is fine.

like you should..... Using only 2 points and any makeshift braces only encourages damage to your trailer hitch and possibly the tractor when it gets away.

 

[Sportsman762]

They make a lock for these drawbars. However they only work if your lift arms are normal thin ones, not extendable.

Universal Drawbar Lock Fits many Case - DBL2

Universal Drawbar Lock DBL2 for sale, For Cat. 1 drawbars up to 1 1-2 inch thick and 3 inches wide. Prevents drawbar from rotating. For Case ALL tractors. Item 112156

www.yesterdaystractors.com

The drawbar goes through the square cut out, and the C channel section goes around the lift arm and its secured by the bolt.