Oil & Fuel maintenance questions

   / maintenance questions #11  
I purchased a shop manual for my JD online for about $70. It came as a CD.

The shop manual told me that one of the rear wheels had to come off to remove the 3ph rod that runs in front of the hydraulic filter. The owner's manual didn't tell me that.

Don't remember what the shop manual says about the fuel filter, but getting to it with the FEL rig on the tractor isn't as easy as they say in the owner's manual. Easiest way for me was to remove a 12 mm bolt that holds the fuel filter assembly onto the frame, rotate the assembly up (flex fuel lines allow this) out of the way of the FEL arm and then remove the ring securing the fuel filter in place. This is on my JD.

Your profile doesn't tell us what tractor you have.

Ralph

See post #7 for tractor.

I find it much easier on my Kubotas to remove the FEL when doing maintenance; don't know about the others, but it might.
 
   / maintenance questions
  • Thread Starter
#12  
I updated my profile. It should say what it is.
 
   / maintenance questions
  • Thread Starter
#13  
See post #7 for tractor.

I find it much easier on my Kubotas to remove the FEL when doing maintenance; don't know about the others, but it might.

good idea. thanks for the advice.

Lee
 

Tractor & Equipment Auctions

8' Agritek 3Pt Grader (A50515)
8' Agritek 3Pt...
2010 BANDIT 4680 MOBILE GRINDER (A51242)
2010 BANDIT 4680...
2019 Ford F-150 4x4 Crew Cab Pickup Truck (A50323)
2019 Ford F-150...
2023 Vivid EV Golf Cart (A51694)
2023 Vivid EV Golf...
2025 12V Diesel Pump and Hose (A50324)
2025 12V Diesel...
2011 Chevrolet Equinox SUV (A50324)
2011 Chevrolet...
 
Top