Lost Fast Dump on Bucket

[Skinnyman]

Thanks npalen. I assume you mean the cover or cap on front side of valve. I attached a pressure gage to the port for dumping bucket. 3/4 of the way over the gauge showed no pressure but I could hear the pump. When I went full over I showed 2550 psi. Have also interchanged qd fittings at valve, no change. Thanks for suggestion. I will try to inspect today.

 

[npalen]

Yes, the cover or cap. Something might have come loose on the end of the spool.

 

[Skinnyman]

Removed both caps. Nothing looks amiss, nothing missing. Springs on both spools are intact. No signs of moisture or corrosion. Both spools travel 1/2 inch from neutral position.