Spaenaur - Fasteners Right Now
www.spaenaur.com
looking for rare metric bolts
- Thread starter Jrasband
- Start date
- Views: 8245
www.spaenaur.com
bearthebruce
Platinum Member
- Joined
- Jul 26, 2018
- Messages
- 542
- Location
- Property is in Floyd County VA
- Tractor
- '05 Massey Ferguson 1533; '22 LS MT125, '23 Kubota SVL65-2
I think that McMaster-Carr has M14-1.5mm pitch - x 70mm long bolts: McMaster-Carr
Price is $17.50/10. Don't think you can buy 1...
Price is $17.50/10. Don't think you can buy 1...
Oaktree
Super Member
Not a lot of enthusiasm among the American public for it, especially when it came to weights or measurements (ie-mileage). Then again, with so much being manufactured overseas try to find a product made in the last 35 years or so that doesn't have metric fasteners.
MikeFarm
Gold Member
There are only three countries in the world that are not using SI units, Liberia, Myanmar and the US 
Egon
Epic Contributor
Jimmy Carter is very intelligent. He was also proficient in science.
Last edited:
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,276
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
And this from someone that used to use an imperial gallon and think it was correct.
Egon
Epic Contributor
At one time Imperial gallons were being used. Fortunately, the Metric system was introduced.
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,276
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
In your opinion not in mine, you are entitled to yours, I'm entitled to mine.
And then I know mine is correct
All others are wrong
WranglerX
Super Member
Back to problem at hand... IF all the available 14mm bolts are 1.50mm thread pitch it would seem to me there is a error in measuring thread pitch of exiting bolts.... What are you using to measure thread pitch....
dodge man
Super Star Member
Earlier I said I got a bolt from the dealer, it was actually a nut. It’s shown in the left side of the picture below. It’s for the front of the mower deck and is metric. At our local farm store I took a nut with me, it would thread onto an English bolt so I bought the nut for it. The English nut would not thread onto the bracket, just different enough. The dealer had the correct one, for something like $4.
