Let there be light

   / Let there be light #1  

tom1023

New member
Joined
Jun 13, 2012
Messages
17
Location
wallingford ct
Tractor
John Deere 1023E TLB
I got these lights from ebay to mount on my JD 1023. I mounted them on the side of the Rops because I have to fold it to get in garage. All I can say is dam they are bright!!
photo 1 - Copy.JPGphoto 1.JPGphoto 2 - Copy.JPGphoto 2.JPGphoto 3 - Copy.JPGphoto 3.JPG
 
   / Let there be light #3  
I got these lights from ebay to mount on my JD 1023. I mounted them on the side of the Rops because I have to fold it to get in garage. All I can say is dam they are bright!!


Do you have make and Model on the lights. They look sweet. Did you have running lights already that you had to remove? I have a 1025r and where you mounted these I have hazard/directional lights.
 
   / Let there be light
  • Thread Starter
#4  
Let me first say, Thanks to both of you. Ok I don't have a model of the lights but if you search ebay for this # 130980021215 That will take you to them. I paid 130 for 4 of them delivered. I mounted them above the hazard lights. I didn't have the running lights so when I wired these lights, I used the switched power that was for those running lights in the dash. Take the left engine cover off and you will see it right there. These pics should give you an idea where I mounted them.
photo 1 - Copy (2).JPGphoto 2 - Copy (2).JPG
 
   / Let there be light #6  
my neck hurts :D

HA-ha... I thought mine would too when first looking at this thread and the thumbnails... but... they show correctly (vertically) when you click them!
 
   / Let there be light #8  
Tom1023. Did you make the bracketed yourself or did you find some parts and pieces somewhere?

I should be getting my first tractor in a the next weeks once the mid-pto and deck come in. I went ahead and bought 4 very similar lights and a light bar for the top of the rops. Was hoping to get lucky with some bracketry and those ubolts.
 
   / Let there be light #9  
My leds make a BIG difference in lighting
 

Attachments

  • 011.jpg
    011.jpg
    652.9 KB · Views: 194
  • 006.jpg
    006.jpg
    732.8 KB · Views: 192
  • 004.jpg
    004.jpg
    401.8 KB · Views: 193
   / Let there be light
  • Thread Starter
#10  
Tom1023. Did you make the bracketed yourself or did you find some parts and pieces somewhere?
I made them up from some brackets I bought at a local hardware store. I did do a bit of welding for u-bolt brackets
 

Tractor & Equipment Auctions

2012 CHEVROLET SILVERADO 2500HD (A52472)
2012 CHEVROLET...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
NEW Wolverine Skid Steer Drive and Augers (A53002)
NEW Wolverine Skid...
2021 PETERBILT 389 MID-ROOF SLEEPER (A52472)
2021 PETERBILT 389...
2015 John Deere Z950M 70in Zero Turn Mower (A51691)
2015 John Deere...
2008 Ford F-350 4x4 Crew Cab Pickup Truck (A50323)
2008 Ford F-350...
 
Top