Leave hydraulic open

/ Leave hydraulic open #1  

Johnmath

New member
Joined
Mar 2, 2010
Messages
2
I have a Farmall 400 to run a wood splitter. The wood splitter has a valve to run the ram on the splitter so I bungee the hydraulic open on the tractor and run the ram with the lever on the splitter. Does this do any damage over time to the tractor hydraulic pump or anything else?
 
/ Leave hydraulic open #2  
I have a Farmall 400 to run a wood splitter. The wood splitter has a valve to run the ram on the splitter so I bungee the hydraulic open on the tractor and run the ram with the lever on the splitter. Does this do any damage over time to the tractor hydraulic pump or anything else?

Welcome to TBN:D

It is a common practice to bungee the lever to provide flow to a logsplitter-no harm done.
 
/ Leave hydraulic open #3  
It won't hurt a thing,
I run a backhoe off my 400 that way,
till I was able to get a larger pump set up on it.
the splitter might be a little slow @ idle though.
 
/ Leave hydraulic open
  • Thread Starter
#4  
Thanks for your help.
 
/ Leave hydraulic open #5  
as long as the splitter is open center and has the proper retun / relief valves.. no issues.

soundguy
 

Marketplace Items

2019 Freightliner M2 106 AWD Altec DM47BTR Insulated Digger Derrick Truck (A60460)
2019 Freightliner...
excavator trenching bucket- one bucket per lot (A61307)
excavator...
2012 TOP HAT TRAILER GOOSENECK FLATBED TRAILER (A58214)
2012 TOP HAT...
2020 DRAGON ESP 150BBL ALUMINUM (A58214)
2020 DRAGON ESP...
2008 DOOSAN G25 GENERATOR (A58216)
2008 DOOSAN G25...
2023 HarbinGer V3 Plus S/A Towable Light Tower (A60352)
2023 HarbinGer V3...
 
Top