Leave hydraulic open

/ Leave hydraulic open #1  

Johnmath

New member
Joined
Mar 2, 2010
Messages
2
I have a Farmall 400 to run a wood splitter. The wood splitter has a valve to run the ram on the splitter so I bungee the hydraulic open on the tractor and run the ram with the lever on the splitter. Does this do any damage over time to the tractor hydraulic pump or anything else?
 
/ Leave hydraulic open #2  
I have a Farmall 400 to run a wood splitter. The wood splitter has a valve to run the ram on the splitter so I bungee the hydraulic open on the tractor and run the ram with the lever on the splitter. Does this do any damage over time to the tractor hydraulic pump or anything else?

Welcome to TBN:D

It is a common practice to bungee the lever to provide flow to a logsplitter-no harm done.
 
/ Leave hydraulic open #3  
It won't hurt a thing,
I run a backhoe off my 400 that way,
till I was able to get a larger pump set up on it.
the splitter might be a little slow @ idle though.
 
/ Leave hydraulic open
  • Thread Starter
#4  
Thanks for your help.
 
/ Leave hydraulic open #5  
as long as the splitter is open center and has the proper retun / relief valves.. no issues.

soundguy
 

Marketplace Items

2015 TEXAS PRIDE GOOSENECK (A63569)
2015 TEXAS PRIDE...
2012 Freightliner M2 106 Altec TA37M 37ft Insulated Material Handling Bucket Truck (A60460)
2012 Freightliner...
2000 CATERPILLAR 988F SERIES II WHEEL LOADER (A62129)
2000 CATERPILLAR...
2005 Manac 48' x 102" Aluminum Fixed Spread Axle Trailer (A62613)
2005 Manac 48' x...
DRAGON 500 BBL ACID TANK (A58214)
DRAGON 500 BBL...
UNUSED INDUSTRIAS AMERICA C10 10' FEEDER TROUGH (A60430)
UNUSED INDUSTRIAS...
 
Top