Leave hydraulic open

   / Leave hydraulic open #1  

Johnmath

New member
Joined
Mar 2, 2010
Messages
2
I have a Farmall 400 to run a wood splitter. The wood splitter has a valve to run the ram on the splitter so I bungee the hydraulic open on the tractor and run the ram with the lever on the splitter. Does this do any damage over time to the tractor hydraulic pump or anything else?
 
   / Leave hydraulic open #2  
I have a Farmall 400 to run a wood splitter. The wood splitter has a valve to run the ram on the splitter so I bungee the hydraulic open on the tractor and run the ram with the lever on the splitter. Does this do any damage over time to the tractor hydraulic pump or anything else?

Welcome to TBN:D

It is a common practice to bungee the lever to provide flow to a logsplitter-no harm done.
 
   / Leave hydraulic open #3  
It won't hurt a thing,
I run a backhoe off my 400 that way,
till I was able to get a larger pump set up on it.
the splitter might be a little slow @ idle though.
 
   / Leave hydraulic open
  • Thread Starter
#4  
Thanks for your help.
 
   / Leave hydraulic open #5  
as long as the splitter is open center and has the proper retun / relief valves.. no issues.

soundguy
 

Tractor & Equipment Auctions

2018 KENWORTH T880 (A53843)
2018 KENWORTH T880...
2010 FORD F750 XL SUPER DUTY DUMP TRUCK (A51406)
2010 FORD F750 XL...
SHOP MADE MANIFOLD TRAILER (A53843)
SHOP MADE MANIFOLD...
1990 Nitro Bass Boat with S/A Galvanized Trailer (A51694)
1990 Nitro Bass...
Kubota SVL95-2 High Flow Cab Skid Steer (A53473)
Kubota SVL95-2...
2021 Chevrolet Express 2500 Cargo Van (A51692)
2021 Chevrolet...
 
Top