happysawer
Silver Member
- Joined
- Oct 1, 2020
- Messages
- 104
- Tractor
- starting to look a them
Do you guys up there have running water?
Just another junk chainsaw
- Thread starter xyz123
- Start date
- Views: 577430
Do you guys up there have running water?
Ok but xyz123 is the guy who wants to see the sharpener, I'm satisfied with the one I have.......
Yes sometimes more than others........
He just has me intrigued to see what a half million dollar sharpen looks like. I know my buddy has 5 sharpeners and that any good stihl dealer have too and are 15,000 new and around 10,000 used. I just think somebody is blowing smoke up someones
===== ((((Originally Posted by happysawer View Post
Now i have a new STHIL chain on it but now nothing to cut. My dealer has two 1/2 million dollar chainsaw chain sharping systems, charges $8 dollars a chain takes about a minuet to do sharping.))))))
He just has me intrigued to see what a half million dollar sharpen looks like. I know my buddy has 5 sharpeners and that any good stihl dealer have too and are 15,000 new and around 10,000 used. I just think somebody is blowing smoke up someones
===== ((((Originally Posted by happysawer View Post
Now i have a new STHIL chain on it but now nothing to cut. My dealer has two 1/2 million dollar chainsaw chain sharping systems, charges $8 dollars a chain takes about a minuet to do sharping.))))))
View attachment 675021
I think whats going on is happysawer was like the guy in this video at the beginning, he couldn't figure out how to sharpen his chain and became the un-happysawer so he started taken his saw chains to the half million dollar sharpener shop.
These square chain sharpeners I thought was expensive but still at $1-1,500.00, one could buy quite a few of them for half million. I like to go into square sharpening but Granberg is all I can afford for now on only 20 cord/year, I'll just keep it on my wish list.....
Kinda long video but interesting...
Square Grinding Tutorial! How to Sharpen Chain with a Simington 451c - YouTube
Pro Sharp Square Chisel Grinder
Simington 451 C Square Chisel Chain Grinder With Stand
I had silvey for square. The early version that they sold to simington.
USG for round.
I still file by hand for my own stuff. Unless there is a ton of chains lined up.
Can see both in this one pic. I only had $700 in both bought used separately.
I hardly ever file anymore, I need something with a motor on it. I tried a cheap Timber Tuff bar mount but had poor results, might be ok on a chain thats been rocked. I tried the more pricey Timber line and not happy with that either, the chain link holder is not high enough so chain rivets tend to ride on top of holder, resulting in chain link movement and carbide binding but only on teeth points facing me, the teth pointing away the carbide wont jamb
happysawer
Silver Member
- Joined
- Oct 1, 2020
- Messages
- 104
- Tractor
- starting to look a them
You are wrong i had never sharpened a chainsaw chain i wanted my chain sharpened so i had my dealer do it cost $8 dollars, my dealer showed me the new glass in closed machine a large machine like you see the CNC machines, service guy told me they had two and cost 500K each, i know nothing about these machines or do i know anything about their costs just saying what i was told.
Next time i am at my dealesr shop i will take a picture of his chain sharping machine
=====
Now after watching many chain sharping videos i ordered the small Oregon chain sharping kit and the Oregon Bar holding device, and will be doing my own sharping.
I hope i have cleared up any misunderstandings.
Happysawer aka RB
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 66,113
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
At $8 a chain, it would take 62,500 chains to pay for each machine. Just doesn't make sense. Maybe it's a CNC machine that he does other stuff with as well? That's the only way it would make sense.
happysawer
Silver Member
- Joined
- Oct 1, 2020
- Messages
- 104
- Tractor
- starting to look a them
Like the Colonel told the Sergeant in the movie "The thin red line" You don't have to tell me i am right will asume it.
What if I charge $100.00/chain.........
happysawer
Silver Member
- Joined
- Oct 1, 2020
- Messages
- 104
- Tractor
- starting to look a them
Yep. and Yep again.
happysawer
Silver Member
- Joined
- Oct 1, 2020
- Messages
- 104
- Tractor
- starting to look a them
what if you........................................................................................................ yeah what if you.
goeduck
Super Star Member
I am sure everyone will beat a path to your door. :greedy:
Love easy money . Said locked up. Everything was checking out. Found fastener from inside pulley area came out and lodged behind flywheel. Now to finish putting back and test and tune.
Whew nasty
LOL found the idle screw missing and down by the lower tank vent area. smh
. Said locked up. Everything was checking out. Found fastener from inside pulley area came out and lodged behind flywheel. Now to finish putting back and test and tune.Whew nasty
LOL found the idle screw missing and down by the lower tank vent area. smh
This why I keep even the cheap saws around. To grab parts from when needed to do stuff on the cheap for occasional use homeowner.
Ran with chain brake on and clutch spring lost its temper. Broke through the brake band too.
Was out of the poulan zama carb kits to try to make sure this saw needed a new carb or not. Cost for new carb is so close. But being I am curious. I remembered a new stihl 180 carb that has been in a bin for 2 years now. Guessed right both use same kit.
Using PP4018 might be a 4218 for part instead of rebuilding it. Just had a slight score and had good used p+c already. Long as newer strato seems most swap.
Also needs a carb kit or a new carb. Being almost same prices.
Sold the little woodshark one yesterday too.
Nice piston still in the little saw
Ran with chain brake on and clutch spring lost its temper. Broke through the brake band too.
Was out of the poulan zama carb kits to try to make sure this saw needed a new carb or not. Cost for new carb is so close. But being I am curious. I remembered a new stihl 180 carb that has been in a bin for 2 years now. Guessed right both use same kit.
Using PP4018 might be a 4218 for part instead of rebuilding it. Just had a slight score and had good used p+c already. Long as newer strato seems most swap.
Also needs a carb kit or a new carb. Being almost same prices.
Sold the little woodshark one yesterday too.
Nice piston still in the little saw
happysawer
Silver Member
- Joined
- Oct 1, 2020
- Messages
- 104
- Tractor
- starting to look a them
I used to try fixing everything but with few years left now, i just trash things that stop working and buy new.
He just has me intrigued to see what a half million dollar sharpen looks like. I know my buddy has 5 sharpeners and that any good stihl dealer have too and are 15,000 new and around 10,000 used. I just think somebody is blowing smoke up someones
===== ((((Originally Posted by happysawer View Post
Now i have a new STHIL chain on it but now nothing to cut. My dealer has two 1/2 million dollar chainsaw chain sharping systems, charges $8 dollars a chain takes about a minuet to do sharping.))))))
View attachment 675021
I knew someone was blowing smoke. 15K new, 10K used. = https://www.tractorbynet.com/forums...n-chain-sharpping-machine-my.html#post5856125
