John Deere 4600 Knocking? Need help

   / John Deere 4600 Knocking? Need help #1  

Mrmoo

New member
Joined
May 16, 2021
Messages
1
Tractor
John Deere 4600
Hey everyone,

So I might have bit off a bit more than I can chew with this project. I am not a mechanic and have never worked on a diesel motor but consider myself handy. I have a JD 4600. When I first bought it, it seemed ok. Not great but ok. As a few weeks passed, it started getting a ton of white smoke and oil coming from the breather tube.
So i tore into the motor and found the piston ings stuck on one piston and the piston ring and piston groove broken on the #4 piston. The cylinder didn't look bad at all. I assume the previous owner used starting fluid which I'm told is a no no. So I put all new pistons and rings in and new head gasket. I get everything back together and it's making this noise. Not sure what it is and need advice before I take everything back apart. The picture is what the oil looks like when i drained it.

Video
 

Attachments

  • PXL_20210516_192527168.MP.jpg
    PXL_20210516_192527168.MP.jpg
    2.6 MB · Views: 135
   / John Deere 4600 Knocking? Need help #2  
I’m not sure what the picture is?? In the video I couldn’t hear any unusual knocking, they make stethoscopes for mechanics, you can use that to pin it down to a particular area of the engine.
 
   / John Deere 4600 Knocking? Need help #3  
A wooden dowel rod held to one's ear makes a cheap tractor/equipment stethoscope.
 
   / John Deere 4600 Knocking? Need help #4  
Hey everyone,

So I might have bit off a bit more than I can chew with this project. I am not a mechanic and have never worked on a diesel motor but consider myself handy. I have a JD 4600. When I first bought it, it seemed ok. Not great but ok. As a few weeks passed, it started getting a ton of white smoke and oil coming from the breather tube.
So i tore into the motor and found the piston ings stuck on one piston and the piston ring and piston groove broken on the #4 piston. The cylinder didn't look bad at all. I assume the previous owner used starting fluid which I'm told is a no no. So I put all new pistons and rings in and new head gasket. I get everything back together and it's making this noise. Not sure what it is and need advice before I take everything back apart. The picture is what the oil looks like when i drained it.

Video
What came of it? What did you find?
 
   / John Deere 4600 Knocking? Need help #5  
Is the knocking in the lower end or up by the valve train? Could need a simple valve adjustment.
 

Tractor & Equipment Auctions

CATERPILLAR D6R XL CRAWLER DOZER (A51406)
CATERPILLAR D6R XL...
STIHL TS420 CUTQUICK SAW (A50854)
STIHL TS420...
JOHN DEERE 975 3 BOTTOM SWITCH PLOW (A51243)
JOHN DEERE 975 3...
2013 FORD F750 26FT BOX TRUCK (A51219)
2013 FORD F750...
2018 CATERPILLAR 259D SKID STEER (A51242)
2018 CATERPILLAR...
2017 Buick Regal Sedan (A50324)
2017 Buick Regal...
 
Top