John Deere 4600 Knocking? Need help

   / John Deere 4600 Knocking? Need help #1  

Mrmoo

New member
Joined
May 16, 2021
Messages
1
Tractor
John Deere 4600
Hey everyone,

So I might have bit off a bit more than I can chew with this project. I am not a mechanic and have never worked on a diesel motor but consider myself handy. I have a JD 4600. When I first bought it, it seemed ok. Not great but ok. As a few weeks passed, it started getting a ton of white smoke and oil coming from the breather tube.
So i tore into the motor and found the piston ings stuck on one piston and the piston ring and piston groove broken on the #4 piston. The cylinder didn't look bad at all. I assume the previous owner used starting fluid which I'm told is a no no. So I put all new pistons and rings in and new head gasket. I get everything back together and it's making this noise. Not sure what it is and need advice before I take everything back apart. The picture is what the oil looks like when i drained it.

Video
 

Attachments

  • PXL_20210516_192527168.MP.jpg
    PXL_20210516_192527168.MP.jpg
    2.6 MB · Views: 136
   / John Deere 4600 Knocking? Need help #2  
I’m not sure what the picture is?? In the video I couldn’t hear any unusual knocking, they make stethoscopes for mechanics, you can use that to pin it down to a particular area of the engine.
 
   / John Deere 4600 Knocking? Need help #3  
A wooden dowel rod held to one's ear makes a cheap tractor/equipment stethoscope.
 
   / John Deere 4600 Knocking? Need help #4  
Hey everyone,

So I might have bit off a bit more than I can chew with this project. I am not a mechanic and have never worked on a diesel motor but consider myself handy. I have a JD 4600. When I first bought it, it seemed ok. Not great but ok. As a few weeks passed, it started getting a ton of white smoke and oil coming from the breather tube.
So i tore into the motor and found the piston ings stuck on one piston and the piston ring and piston groove broken on the #4 piston. The cylinder didn't look bad at all. I assume the previous owner used starting fluid which I'm told is a no no. So I put all new pistons and rings in and new head gasket. I get everything back together and it's making this noise. Not sure what it is and need advice before I take everything back apart. The picture is what the oil looks like when i drained it.

Video
What came of it? What did you find?
 
   / John Deere 4600 Knocking? Need help #5  
Is the knocking in the lower end or up by the valve train? Could need a simple valve adjustment.
 

Tractor & Equipment Auctions

2013 PETERBILT 365 T/A DUMP TRUCK (A51406)
2013 PETERBILT 365...
JOHN DEERE CP 770 (A53084)
JOHN DEERE CP 770...
2021 Vermeer Wood Chipper (A51573)
2021 Vermeer Wood...
2000 POLARIS MAGNUM 325 ATV (A51406)
2000 POLARIS...
2025 New/Unused Wolverine 36in Hydraulic Backhoe Excavator Thumb (A51573)
2025 New/Unused...
2025 New/Unused LandHonor Heavy Duty Plate Compactor (A51573)
2025 New/Unused...
 
Top