OP
Workin fool
Member
I can turn both shafts by hand. Thanks for heads up on washers and tool That tool doesn’t come cheap. But while I’m in there might as well change it.
Jd1020 hydraulic problems
- Thread starter Workin fool
- Start date
- Views: 3685
-
- Tags
- john deere 1020
OP
Workin fool
Member
Does anyone have a parts number for packing or seals for the low pressure lines going to the housing on jd 1020
Tx Jim
New Member
If you need packings for hyd lines that insert into clutch housing they're part # R1662R
Zebrafive
Super Member
See if your dealer will loan/rent you the tool. My dealer loaned me their tool, but that was over 20 years ago, before a Mega dealer bought them out.
Zebrafive
Super Member
You may as well also buy the gasket, O-rings/packing for the clutch housing to transmission case split. Not knowing your serial number, I did not list P/Ns
Tx Jim
New Member
workin fool
I hope your tractors engine serial # is above 035895- because rear main seal for lower serial # costs $387.75 when procured from JD.
I hope your tractors engine serial # is above 035895- because rear main seal for lower serial # costs $387.75 when procured from JD.
OP
Workin fool
Member
OP
Workin fool
Member
Yes serial number is 79000. Thanks for everyone’s help
Tx Jim
New Member
""ENGINE NOT tractor serial #"" determines engine rear seal part #
OP
Workin fool
Member
You are right Jim. Engine is 123000,
