JD rotory cutter

[buddygunzz]

any info on this would be great.....sereial# AW 25206 A88. don't know how old or anything about it only that is 4' cutter and John Deere...need to figure out how to adapt to IMATCH also.

thanks

 

[joecdeere]

Buddy, did that number come off a Deere serial number tag, or off the gearbox?
AW25206 is the part number for a gearbox on the 4' model 403 & the 5' model 503, this was built in the late 80's and early 90's. I also show a model 403 with a serial number ending in 25206, but would be W00403X025206, it was built in 1992

 

[buddygunzz]

thanks joe....the number was off the gearbox so it's a 403 model......looked for blades and they are the same as the LX4, so parts are still avalible.
any ideas for the IMATCH

thanks

 

[joecdeere]

you're gonna have to make it fit! that was built long before there was a "standard" measurement

 

[kennyd]

Got a welder or a friend with one?

 

[buddygunzz]

got it to fit like a glove...this is my first rotary cutter, any tips or mantinance on the slip clutch?
found the tag# W00403X012558 what year?
thanks