jd 4115

[font]

Hi can anyone help I have a 4115 that I bought as an unfinished resto project I was hoping to get some photos of the
Alternator bracket in actual situ and pump just want to make sure I put it back together properly. Many thanks in advance.

 

[ovrszd]

Sorry I can't help you with any pics or first hand knowledge. I'm a fan of the JD4115 though. Please post pictures as you finish the project!!!

Welcome to TBN from across the pond.

 

[RG1]

Here ya go. I just went and took these for ya. I hope they show you what you are looking for-

 

[font]

thats great thankyou for your help and quick reply, think im missing a bracket from underneath the manifold. Couple of pics of the project, only a couple of days into it,

 

[RG1]

I'd love to have a cab like that for mine.

 

[font]

View attachment 361337 thats great thankyou for your help and quick reply, think im missing a bracket from underneath the manifold. Couple of pics of the project, only a couple of days into it,

 

[font]

Cheers ill post a couple of piccys,

 

[font]

Hi RG1 does the belt tensioner bracket bolt to the water pump?

 

[RG1]

What's the orange colored know up above the steering wheel? is it just laying up there? Never seen anything like that on one here.

 

[RG1]

Hi RG1 does the belt tensioner bracket bolt to the water pump?

Sorry to be slow, but I had to run back out to my shop behind the house to check.

No. The tensioner bracket runs over to the engine where it has a double bend in it that goes down and back towards the engine. It has a hole in it that the mounting bolt passes through, where it threads into a hole in the top of the engine below the thermostat housing. If you look at my 3rd picture down from the top, you can see the bend I am talking about in that bracket. That should give you an idea of where to start looking for the mounting hole just below that.