Just bought an old Iseki 1610 two wheel drive tractor and trying to hook a 1 bottom blow to it since 2 bottom plow is too heavy maybe. When looking for a 1 bottom plow I can only find the ones with hitch sleeve and not 3 point. Someone told me to buy a 3 point adapter and then hook the sleeve hitch plow to it If I do so, what category three point adapter I should buy. Please advice.
Iseki TS 1610
- Thread starter Sawhney
- Start date
- Views: 1335
wheelbuilder
Platinum Member
- Joined
- Oct 30, 2018
- Messages
- 553
- Location
- Upstate, NY
- Tractor
- 1988 Bolens/Iseki 1502, also Sears GT5000
I don't see a spec listed for it on tractordata.com, but I'd imagine it is a cat 1 hitch on the 1610.
Edit: So just below is a thread that may help, they suggested measuring the pins at the top link and lower arms to get the size correct.
www.tractorbynet.com
Edit: So just below is a thread that may help, they suggested measuring the pins at the top link and lower arms to get the size correct.
Iseki Newb - Hitch Question
Greetings. First post here. Snagged this lean mean fighting machine last summer. TS1610 4x4 w/FEL, SAR? 1700 tiller, new rice patty tires that maul turf without pitty or shame, open ROPS, 300 hours if you believe the meter. Its got some personality and punch for such a small tractor. Really...
www.tractorbynet.com
Will measure. ThanksI don't see a spec listed for it on tractordata.com, but I'd imagine it is a cat 1 hitch on the 1610.
Edit: So just below is a thread that may help, they suggested measuring the pins at the top link and lower arms to get the size correct.
Iseki Newb - Hitch Question
Greetings. First post here. Snagged this lean mean fighting machine last summer. TS1610 4x4 w/FEL, SAR? 1700 tiller, new rice patty tires that maul turf without pitty or shame, open ROPS, 300 hours if you believe the meter. Its got some personality and punch for such a small tractor. Really...
