If you have Toolcat questions, ask them here...

[Xfaxman]

Check the purchase contract, it should have a short warranty.

Call the dealer, he should fix it.

 

[CNCGuy]

He said if its not something major it would be on me.
So I am trying to do everything I can before calling Bobcat to come out.
It there a source of wiring diagram?

 

[Jabonee]

Also fuses are not labeled.
The fuses I am checking are below front of driver seat.

Fuse box you need is located by right knee when sitting in the seat. :thumbsup:

 

[CNCGuy]

Nothing on the wall by the right knee.
Box I see is between my legs.

Does the box stick out or is it behind a panel?

 

[CNCGuy]

Removed the selector arm.
seems like common in Pin 1
Pin1 to Pin 2 looks like rabbit button - momentary contact,
Pin 1 to 5 active in park
1 to 6 in forward
1 to 4 in reverse.

Looks like actuator/lever switch is working ok

 

[Jabonee]

Removed the selector arm.
seems like common in Pin 1
Pin1 to Pin 2 looks like rabbit button - momentary contact,
Pin 1 to 5 active in park
1 to 6 in forward
1 to 4 in reverse.

Looks like actuator/lever switch is working ok

Do you have 12v going to it?? :confused3:

 

[Jabonee]

Nothing on the wall by the right knee.
Box I see is between my legs.

Does the box stick out or is it behind a panel?

Page 90 of your manual.

 

[mykleh]

Just an FYI if one of my fellow Toolcat aficionados or Bobcatters in general pull a boner like me and crush their 7-pin connector between the SSQC and your attachment there is an alternative to the $300+ cable replacement.. Not associated with this company but I did order the connector on Monday for $98 and was in my mailbox yesterday.. 1 man band.. for people running non skid steer attachments also make harness kits and what not..
Skid Steer Genius designs and manufactures industrial control systems.

 

[mykleh]

Just an FYI if one of my fellow Toolcat aficionados or Bobcatters in general pull a boner like me and crush their 7-pin connector between the SSQC and your attachment there is an alternative to the $300+ cable replacement.. Not associated with this company but I did order the connector on Monday for $98 and was in my mailbox yesterday.. 1 man band.. for people running non BOBCAT skid steer attachments also make harness kits and what not..
Skid Steer Genius designs and manufactures industrial control systems.
View attachment 582923

 

[Xfaxman]

Just an FYI if one of my fellow Toolcat aficionados or Bobcatters in general pull a boner like me and crush their 7-pin connector between the SSQC and your attachment there is an alternative to the $300+ cable replacement.. Not associated with this company but I did order the connector on Monday for $98 and was in my mailbox yesterday.. 1 man band.. for people running non BOBCAT skid steer attachments also make harness kits and what not..
----------------------------------------

Yep, I bookmarked this page a long time ago: Bobcat(R) 7 Pin Adapters – Skid Steer Genius