IDENTIFY THIS WELDER

/ IDENTIFY THIS WELDER #1  

Professor Marvel

Platinum Member
Joined
Oct 16, 2010
Messages
855
Location
Virginia near Culpeper
Tractor
Ford 5000, Kubota 2150 HST, NH TC45 D, JD 375 Baby Skid Steer --- STUFF THAT GOES ON EM, Schwinn Stingray
Can anybody help me identify this welder? Obviously a Miller but what model?It has a 2 cyl Onan motor that I think was made in 1984. I am looking for parts and a manual.
Thanks
 

Attachments

  • WELDER.jpg
    WELDER.jpg
    180 KB · Views: 796
/ IDENTIFY THIS WELDER #2  
Looks like a Miller Bobcat. How many amps is it. You should be able to find parts for it. They still make the Bobcat welders.
 
/ IDENTIFY THIS WELDER #3  
Its probably a 185 amp AC unit or so? Second portable welder my father bought. (first was an SA short hood hand crank that needed more work than it was worth..at the time) I believe it was called a "Rough Neck or Blue Star". Manual operated idle.

Edit: Thinking about it more it could be a AEAD200.
 
Last edited:
/ IDENTIFY THIS WELDER #4  
Looks to be either a Blue Star or a Legend AEAD 200 LE. Sold a pile of these back in the 80's..
 
/ IDENTIFY THIS WELDER #5  
Might be a roughneck too. Send a Pic of the front.
 
/ IDENTIFY THIS WELDER #6  
Looks like the bobcat I had in my last service truck with most of the side pannels missing.
Bill
 
/ IDENTIFY THIS WELDER #7  
I'm not sure there was a Bob Cat in 1984.
 
/ IDENTIFY THIS WELDER #8  
That's what I was thinking. Seems like the first bobcat I saw was in 87 or 88.
 
/ IDENTIFY THIS WELDER #9  
Just write down the serial number and go to the Miller Welding website under literature and contact them. They will have a reprint or downloadable PDF file of the manual and can probably tell you who the original purchaser was as well.
 
/ IDENTIFY THIS WELDER
  • Thread Starter
#10  
Just write down the serial number and go to the Miller Welding website under literature and contact them. They will have a reprint or downloadable PDF file of the manual and can probably tell you who the original purchaser was as well.

I am sorry. I have tried to get that at their website and cannot seeem to find the heading that gives me those choices. Is there any way you might have a link to the specific url?
Thanks
 
/ IDENTIFY THIS WELDER #11  
Show us the front of the Machine...
:confused2:
 
/ IDENTIFY THIS WELDER
  • Thread Starter
#14  
Thanks Shield Arc
That is very close to what I am looking for. In fact it tells me that it was made in early 1986. However for units produced before 2000 it is required to put in a model number. The model number is what I am trying to find. Sort of a catch 22. My serial number looks like JG104381. I will keep trying. I appreciate your help.
 
/ IDENTIFY THIS WELDER #15  
Thanks Shield Arc
That is very close to what I am looking for. In fact it tells me that it was made in early 1986. However for units produced before 2000 it is required to put in a model number. The model number is what I am trying to find. Sort of a catch 22. My serial number looks like JG104381. I will keep trying. I appreciate your help.

It's almost certain to be a Legened AEAD 200 LE. It evolved into the Bob Cat in the late 80's.
 

Marketplace Items

2006 Ford F-250 4x4 Crew Cab Pickup Truck (A61573)
2006 Ford F-250...
2013 VOLVO A25F 6X6 OFF ROAD DUMP TRUCK (A62129)
2013 VOLVO A25F...
Wacker Neuson PT2 Water Pump (A59228)
Wacker Neuson PT2...
2018 Kenworth W900 Ext. Day Cab (A62613)
2018 Kenworth W900...
2015 Freightliner M2 106 Petersen TL3 Forestry Grapple Truck (A61573)
2015 Freightliner...
2026 DEVELON DX27Z-7-US30 EXCAVATOR (A64279)
2026 DEVELON...
 
Top