ID Grain Drill

[dieselscout80]

Anyone know what wheels will work on a McCormick M drill that has rubber tires aka low wheel.


The part number in my manual is 453 631 R91 for 15” wheels and 16 632 W for 16” wheels.

They are 8 bolt wheels and the center hole a bit less than 5.25” in diameter.

 

[dieselscout80]

Well after welding the area around the valve stem on the one wheel I have a working McCormick M grain drill. I planted 2.5 acres of rye with it today.

Note 225/75r15 tires are too wide as they rub on the drive end of the drill. It had 215s on it but couldn’t find any of them.

 

[dieselscout80]

After finally using my McCormick M grain drill and the factory power lift works great I don’t think I’ll be switching it to hydraulic lift.

I do need to look at replacing the roller wheel bearings as it has plenty of play.

 

[MAX-24-Dean]

Glad to see its working for you.