I Learned something today about weight

   / I Learned something today about weight #1  

Msamt

Gold Member
Joined
Nov 15, 2013
Messages
424
Location
Enfield, NH
Tractor
Kioti Dk45SE
Operated the machine without the counterweight on the 3ph for a few hours - too lazy to put it on after welding the chains to the pins on it

Night and day, so much less stability, and really showed me how much time I save with ballast, it was an eye opener how much surer 900lbs out back made the tractor perform.

Also couldn't back worth a crap either up even slight hills. In 4wd, Low, locked diff.

If you havent considered weight on the 3ph, it's likely the simplest way to work better, and stay alive longer!
MT
 
   / I Learned something today about weight #2  
Operated the machine without the counterweight on the 3ph for a few hours - too lazy to put it on after welding the chains to the pins on it

Night and day, so much less stability, and really showed me how much time I save with ballast, it was an eye opener how much surer 900lbs out back made the tractor perform.

Also couldn't back worth a crap either up even slight hills. In 4wd, Low, locked diff.

If you havent considered weight on the 3ph, it's likely the simplest way to work better, and stay alive longer!
MT

A good lesson for all. And these problems manifest themselves even more when working on sloped terrain.
 
   / I Learned something today about weight #3  
Here too. I did some loader work without the hoe attached and had trouble climbing a slight hill with the bucket full. Kept spinning the rear wheel. I needed to use four wheel drive to climb.
 
   / I Learned something today about weight #4  
I agree totally, it only took me one bucket full to learn to keep weight on the 3pt hitch. In fact, when using my forks, it will only lift about 3/4 the total weight without lifting the rear filled tires off the ground when there is no weight on the back.
 
   / I Learned something today about weight #5  
Upon reading the title of this thread, I thought the first sentence would begin with:

"Well, the Doc says my broken toes should heal in about 4-6- weeks....." :rolleyes:

...but maybe you've already learned that about weight.
 
   / I Learned something today about weight #6  
Are you running R4's on the rear,if not load them along w/rear ballast more of positive different. :thumbsup:
 
   / I Learned something today about weight
  • Thread Starter
#7  
Upon reading the title of this thread, I thought the first sentence would begin with:

"Well, the Doc says my broken toes should heal in about 4-6- weeks....." :rolleyes:

...but maybe you've already learned that about weight.
Now that's funny....
 
   / I Learned something today about weight
  • Thread Starter
#8  
Are you running R4's on the rear,if not load them along w/rear ballast more of positive different. :thumbsup:
Yep, loaded with Rimguard and dished to the full width. Still need weight on the 3ph using a loader no matter what (at least that's my story, and I'm sticking with it!)
 
   / I Learned something today about weight #9  
Yep, loaded with Rimguard and dished to the full width. Still need weight on the 3ph using a loader no matter what (at least that's my story, and I'm sticking with it!)

That's a good story, one well worth sticking with!
 
   / I Learned something today about weight #10  
Upon reading the title of this thread, I thought the first sentence would begin with:

"Well, the Doc says my broken toes should heal in about 4-6- weeks....." :rolleyes:

...but maybe you've already learned that about weight.

Arrgghh! I had a broken foot last summer. Broke the bone from the little toe to the heel on the outside. Not fun. No more noise about broken stuff, it gives me flashbacks...lol :ashamed:
 

Tractor & Equipment Auctions

2013 COACHMEN CATALINA TRAVEL TRAILER (A52472)
2013 COACHMEN...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Engel 20' Boat (A50121)
Engel 20' Boat...
2025 New/Unused Wolverine Concrete Breaker (A51573)
2025 New/Unused...
2005 International 7400 Chassis Truck, VIN # 1HTWGAAT75J048748 (A51572)
2005 International...
JOHN DEERE 5125R LOT NUMBER 24 (A53084)
JOHN DEERE 5125R...
 
Top