hydraulic pump

[apache412]

I have a 1954 Ford NAA I just bought it and got it running after years of sitting and the 3 point arms don't raise, I have drained and refilled the case and blew into the dip stick hole to prime it and nothing I took the pipe plug off the piston type hydraulic pump and fluid came out with the motor running does this mean my pump is good? and I have problem some where else

 

[atsah]

Do you have a filter or screen that might be clogged?

 

[nyone]

That big fill cap under the seat is right by the hyd cylinder under the rockshaft cover. Take a look in there. Also check your fluid levels and possition/draft lever.

 

[nyone]

Under the seat. Its a big 2.5in cap with a square drive. There may be two. One back my the top link attachment.

 

[apache412]

yes that is the fill hole, what will I be looking for? fluid moving? it is full I already checked the level

 

[nyone]

Yes internal leaks. The pipe passes through the tranny as well. You may need to pop the shifter cover off.

Pulling the rockshaft cover would be my last resort.

 

[apache412]

ok I guess that will be this weekend before I get to that you are talking about the transmission shifter cover right?