Homemade garden mini tractor 4x4

   / Homemade garden mini tractor 4x4
  • Thread Starter
#151  
Transmission repair. Replacement of all bearings, synchronizers, switching plugs and clamps, secondary and primary shafts. Also repairs locking rear differential

IMG_20170101_102424.jpg IMG_20170103_143830.jpg IMG_20170103_140935.jpg IMG_20170103_135214.jpg IMG_20170103_120627.jpg IMG_20170103_115223.jpg IMG_20170103_113943.jpg IMG_20170103_084251.jpg IMG_20170102_105636.jpg IMG_20170103_144706.jpg
 
   / Homemade garden mini tractor 4x4 #153  
Hi guys. Sometimes there are moments when the four-wheel drive and locking rear differential can not do the job. Thinking hard to also install differential lock on the front axle. Or install a winch.

I would start easy and put the axle of your trailer all the way to the back, so a good portion of the weight rests on the tractor. Right now, you're just pulling dead weight. When you can put it on the tractor, it can help generate traction.
 
   / Homemade garden mini tractor 4x4 #154  
I would start easy and put the axle of your trailer all the way to the back, so a good portion of the weight rests on the tractor. Right now, you're just pulling dead weight. When you can put it on the tractor, it can help generate traction.

+1, it's true. The more weight you'll have between rear axle of a tractor and an axle of a trailer, the more down pressure you will have on a rear axle of a tractor, what really generates better traction. But be careful not to exceed a distance between both axles, so your tractor's front end won't be lifted up.
 
   / Homemade garden mini tractor 4x4 #157  
Innovative, good job making use of what you get can for parts. Is this a current upgrade you are making or one you did in the past?
 
   / Homemade garden mini tractor 4x4
  • Thread Starter
#158  
Innovative, good job making use of what you get can for parts. Is this a current upgrade you are making or one you did in the past?

Thank. This a current upgrade. I want to make cultivator, so need a new strong drive shaft.
 

Tractor & Equipment Auctions

Taylor Way Ripper (A57454)
Taylor Way Ripper...
43024 (A59228)
43024 (A59228)
2011 Ford F250 Pick Up (A55272)
2011 Ford F250...
1987 Ford Bronco II Multipurpose Vehicle (MPV), VIN # 1FMCU14T6HUD19995 (A57453)
1987 Ford Bronco...
Deere 35P (A53317)
Deere 35P (A53317)
2020 MACK GR64FT (A58214)
2020 MACK GR64FT...
 
Top