Help 3400 3 point wont move

[banjopkr]

Hi all,
I was using my blade to move snow today and after an hour of working the three point up and down the lever "broke free" from whatever it was attached to. In other words I can freely move the leverback and forth and I cant tell if it used to be attacheed to somthing. Any help would be great.
Thanks

 

[ozzie tractor]

Hi all,
I was using my blade to move snow today and after an hour of working the three point up and down the lever "broke free" from whatever it was attached to. In other words I can freely move the leverback and forth and I cant tell if it used to be attacheed to somthing. Any help would be great.
Thanks

have a quick look down where the lever moves and look for anything obvious, move the lever up and down and see if the shaft into the lift control valve moves, if it does call the dealer. unless you have a bit of mechanical know how, dont dig any futher as it can get a bit confusing.

 

[ccsial]

I don't know it you have a gear or HST model.

On the HST the lever goes into the transmission case. If you look from the rear and have someone move the lever you may be able to see if the pin fell out. If everything looks OK you should call the dealer next. I have not heard of this problem yet.

How many hours do you have? Is it a gear or HST?

Keep us informed as to what happned and good luck. I hope it is simple to fix.

 

[banjopkr]

Hey thanks for the replies. After I removed the shroud under the seat I discovered that the pin had fallen out an easy fix thankfully.
Thanks again!

 

[ccsial]

Hey thanks for the replies. After I removed the shroud under the seat I discovered that the pin had fallen out an easy fix thankfully.
Thanks again!

Thanks for the update, Tha'ts great news!