Quick Hitches Harbor Freight Quick Hitch Adapter

[ctpres]

I need inside dimension to see if it will fit my land pride quick hitch.

 

[Mighty Dodge]

They make two different sizes. I don't remember the exact dimensions but the narrow ones around 26-1/2" wide the wide one's around 27-1/2" wide.

M.D.

 

[kennyd]

Here is a link to the ASAE standard that the QH's follow: ASAE

More often than not, it's the measurement from the lower pins to the top pins that is that problem.

 

[ctpres]

They make two different sizes. I don't remember the exact dimensions but the narrow ones around 26-1/2" wide the wide one's around 27-1/2" wide.

M.D.

Sorry should have said more. The adapter that mounts on top of the HF quick hitch. It allows for a greater range of implements that will work on quick hitch. I think the part number is 29309 and it costs around 10 bucks. I just need the opening between the tabs that attach to the quick hitch.

 

[ayelvington]

I have a HF quickhitch and love it. What I hate are the few implements that claim to meet the standard but don't. Vertical distance has never been a problem, but the horizontal distance between the bottom hooks is a pain. Once you get a hitch, be sure to shop with a tape measure in your hand to make sure you don't end up with a non-standard "standard" 3-point implement.

Good luck!

 

[TomWhite]

Sorry should have said more. The adapter that mounts on top of the HF quick hitch. It allows for a greater range of implements that will work on quick hitch. I think the part number is 29309 and it costs around 10 bucks. I just need the opening between the tabs that attach to the quick hitch.

I have the HF hitch, and have seen the Landpride. I believe it will fit. Landpride does make an add-on of their own, but it simply two metal bars with a hole in each end of each bar. That is something which could be easily made from scrap metal.

They call it a floating top link assembly.

http://www.landpride.com/manuals/man_qh.html

 

[teg]

http://www.tractorbynet.com/forums/attachments/141602-3-pt-quick-attach.html

You talking about the adaptor itself, Scroll towards the bottom of the link, I have measurements on mine that I took off of a Speeco one, which looks exactly like my horrible freight one.

 

[radioman]

Here it is. it's 1 and quarter wide. On the inside and its 1 and seven eights on the outside. You need the outside dimension, not inside. The HF adapter goes on outside on the QH. I am not sure If you trying to using the otherway around.