k0ua
Epic Contributor
But why not install Gutta Gard for a few hundred bucks and a little time, and be done with it for ever?
Gutters!
- Thread starter riptides
- Start date
- Views: 3923
But why not install Gutta Gard for a few hundred bucks and a little time, and be done with it for ever?
KennyG
Elite Member
Quiet!! His wife may figure this out!
BoylermanCT
Veteran Member
- Joined
- Apr 1, 2013
- Messages
- 1,501
- Location
- Barkhamsted, CT
- Tractor
- Montana R2844, New Holland TC29D, Hustler X-One
Gutters are highly over-rated. I bought my house 6 years ago, and there was one 6' open ended gutter over the front door, no down spouts etc. I did the responsible thing and had gutters installed around the entire house. Now they fill up with pine needles and overflow. Before, the water was spread out evenly over the entire roof, and I had no problems. Now, water from hundreds of square feet of roof is funneled into 8 downspouts, and my basement leaks because there is too much water in 1 place! Glad I spent lots of money to have them installed!
KennyG
Elite Member
I have most of my downspouts hooked to underground drain pipe (solid to 10+ feet away from the building and then perforated). It's not that much work and permanently solves the water problems.
Anyone tried the Easy-On? Fine mesh stainless steel. Mesh is supposedly small enough that roof gravel will not clog. Ads suggest that it is highly rated by some well known reviewers.
EasyOn 5" Gutterguard 100'
I have big 6" gutters, so would need their pricier "supersized" that runs about $250/100ft. They sent me some sample pieces in each size. Seems well made and the mesh really is tiny.
- Jay
EasyOn 5" Gutterguard 100'
I have big 6" gutters, so would need their pricier "supersized" that runs about $250/100ft. They sent me some sample pieces in each size. Seems well made and the mesh really is tiny.
- Jay
prichard
Veteran Member
That lip on the front looks like it is close to 1/4". I'd be afraid that would trap too much debris.
Pilot
Veteran Member
- Joined
- Nov 20, 2004
- Messages
- 1,219
- Location
- Oregon
- Tractor
- JD 770, Yanmar 180D, JD 420 (not running), had a Kubota B6200
I think the effectiveness of various gutter guard designs varies with the kinds of trees you are dealing with. What works for maples may be no good for pine needles.
So if you are happy or unhappy with your gutter guards, tell us what kinds of trees you have!
BTW, several years ago on This Old House they were demonstrating the kinds of guards with the rounded lip at the edge, the kind where the water clings to the guard and goes into the gutter and the debris goes over to fall on the ground. As they were showing it, half the debris went into the gutters!
So if you are happy or unhappy with your gutter guards, tell us what kinds of trees you have!
BTW, several years ago on This Old House they were demonstrating the kinds of guards with the rounded lip at the edge, the kind where the water clings to the guard and goes into the gutter and the debris goes over to fall on the ground. As they were showing it, half the debris went into the gutters!
zombie
Silver Member
I too have been looking for gutter guards of some kind for my shop. There's a couple of fir trees that plug them up. During fall and winter I have to clean them out about every month. Usually in the rain.
k0ua
Epic Contributor
I have cedars that drop their spines/needles and oaks, which drop flowers in the Spring, and lots of leaves in the fall.
Sawyer Rob
Super Member
I've see two test with gutter guards, on both, when a heavy rain was pouring down waaaay too much water went over the gutters, that's exactly the water I want to catch...
Is it really too much work to go out 2 times a YEAR on a nice day and clean them? My wife says she enjoys going out and doing small jobs like that with me, and I enjoy having a wife who feels that way...
SR
Is it really too much work to go out 2 times a YEAR on a nice day and clean them? My wife says she enjoys going out and doing small jobs like that with me, and I enjoy having a wife who feels that way...
SR