Gooseneck or bumper pull?

   / Gooseneck or bumper pull? #31  
Actually, a properly installed GN hitch will be CENTERED on the centerline of the rear axle, not in front of it.
I installed my own in my F350, and it is slightly in front of rear axle
DBF37376-860A-4EFF-9DC4-3CCA45A0FD99.jpeg
 
   / Gooseneck or bumper pull? #34  
Every one I’ve ever installed (B&W and others) is just FORWARD of centerline. Including factory installed from Ram.
Yep. I installed a B&W on my newer SD. It's slightly forward. Tomorrow I'll report how much.
 
   / Gooseneck or bumper pull? #35  
Everything that I have seen says to mount the ball 4" in front of the rear axle.
I don't think mine are that far forward. I'm too lazy to go check now. ;)
 
   / Gooseneck or bumper pull? #36  
Each trailer type has their place. My ‘opinion’ is a bit less than Hay Dude, north of 10k, I like the weight better distributed, but legally on a bumper pull can go much more

A bummer pull will track better behind you in turns as the hitch connection goes the opposite direction of the turn. Up to a certain length the trailer tires will take the same path as the truck rear tires, never the case with a GN, it will always track inside.

Being able to go beyond 90* in a turn can be very beneficial at times with a GN (not recommended often or loaded heavy as it is a great strain on trailer suspension .

Losing bed space with a GN sucks.

GN is overall longer if storage space is a concern.

If you don’t need to haul heavier weight, I’d stick with bumper.
 
   / Gooseneck or bumper pull? #37  
My F150 is used for hitch pull for my small garden service trailer and my 7,920 pound tractor/trailer.

My F250 is used for gooseneck for my 14,000+ other trailers.
 
   / Gooseneck or bumper pull? #39  
I cheat and have both. I use the 28+4 20K tandem dual wheel GN for heavy loads. I use the 18+2 14K Bumper Hitch for lighter loads.

I prefer to pull the GN but it's overkill sometimes. The trailer weighs 7K. Kinda silly for a 4K rock crawler. :)
 
   / Gooseneck or bumper pull? #40  
I prefer to pull the GN but it's overkill sometimes. The trailer weighs 7K. Kinda silly for a 4K rock crawler. :)
Haha...I'm imagining me driving down the highway with that behind my Tundra with a UTV on the trailer. That would almost max out my load.
 

Tractor & Equipment Auctions

2014 International DuraStar 4300 Terex BT3063 30,000LB Crane Truck (A48081)
2014 International...
2014 CATERPILLAR 277D SKID STEER LOADER (A51222)
2014 CATERPILLAR...
2025 K1119 UNUSED Metal Carport (A50860)
2025 K1119 UNUSED...
2014 Chevrolet Impala Limited Sedan (A48082)
2014 Chevrolet...
1985 Kentucky 48 ft. Dry Van Trailer (A50860)
1985 Kentucky 48...
2018 John Deere R4038 Self Propelled Sprayer (A50657)
2018 John Deere...
 
Top