Good morning!!!!

[Looking4new]

Good morning, the low is 46 and going up to 75°F. Wind E 3 mph. A mix of sun and cloud.

Drew, lefty tighty, righty loosey just doesn't have the same 'ring' to it.
My Packard had left hand threads on the left side wheel studs. Each stud had a little 'L' stamped into it.

I'm going to shop around and see if I can score a 80lb bag of flake calcium. I've got some grass that desperately needs killing.

Not much going on today, just another day of rest.

Have a safe day all

 

[daugen]

what a lovely cool morning out
62 degrees, hard to believe, just picked tomatoes, brought in about five pounds.
In another day or two will be a dozen more as all the determinate tomatoes ripen.

Bill, yes, a L or an arrow, something.

saw some garden weeding I need to do, will head back out to do that.
only got a third of an inch of rain last night but that softened the ground a little.
sure made the grass green. again...lot of mowing.
but I see a ten day much cooler dry forecast
painting and paving weather...

 

[Buppies]

72 this morning storms went east west south of us. Thunder but only spit rain. Several of new shrubs drowned .

Got grass mowed all but at the road. Side yard unmovable due to downed trees. Sciatic nerve will not allow me to do much uneven ground a no no. Even riding zero turn causes pain if ride gets bumpy.

Cool engine mostly

Hope wife is better m7040 or at least has better day

Phil how about making pens one gentleman man I know makes them from bullets and casings with different types of wood in between popular item he sells met him at place we get drawings for jobs to estimate.

Prayers for all our Country

 

[Buppies]

Hope trip is successful reqarding blower Thomas

 

[m7040]

Hope wife is better m7040 or at least has better day

Thank you for the thought

She copes the best she can and the pains are always there but gets worse in periods where it is debilitating. We celebrate when there is a little relief for her and hope it will last a while

 

[FriendwithTractor]

Good Morning to All who Celebrate! Currently 62° heading to a high of 77°. Cloudy with a smattering of rain. Heard some wind last night but we didn't get nearly the amount of rain or the severity of storms called for.

Glad this week is over, it was a whirlwind of a week at work. Heat makes everyone snappy and short tempered. Can't say I blame them, If I was working essentially outdoors in 108° real feel temps, I'd be peevish too.

Looked at the twelve acres with the old man. Twelve is really a misnomer, as there's a little flyaway spit heading down the mountain. Main block of the parcel is maybe 10 acres total. Mobile home on it is a write off. But the plusses are established water, septic and electric There's also a road someone had cut higher up into the parcel. Slope isn't vertical, but isn't nothing either. The timber that's on it isn't valuable, but they haven't logged it out either.

Don't know why they chose to put everything so close to the gravel road, as the property goes up to and over the ridge. My best guess is they went as far as the money could go and parked the mobile wherever they could get it. 199k for it, which is insanity. Especially because it's an estate. Though it did just go on the market. I think they'll find out real quick that it's not worth it.

Not much else going on, Mom returns from snuggling with my nephew this week today. I need to start the process of getting the tags for the trailer today. Lunch meeting. Boss wants to buy some firewood off me and needs some landscaping help at some point. Otherwise goals for this weekend involve doing as little as possible.

Passed a Mennonite farm on the way into work, they had a massive oak tree down in their yard. Don't think we had collected any damage at our place, but I'm sure I'll hear about it if we did.

Prayers for all Ailing and Recovering!
Y'all stay safe out there this weekend and be well! Enjoy the cooler weather all!

 

[ponytug]

Drew, this is the one I need.

Kubota #76539-34372 Blade Bolt

www.messicks.com

There are some on Amazon and EBAY. But the reviews are not very good.

There is this; 4 stars for three bolts @ $16.20, or $5.40/ea

Amazon.com: Chamixx 3X M12 x 1.25 Blade Bolts K5651-34372 K5651-34370 76539-3437-2 Compatible with Kubota ZD321 ZD326S ZD331 ZD21 ZD25 ZD22 : Patio, Lawn & Garden

Amazon.com: Chamixx 3X M12 x 1.25 Blade Bolts K5651-34372 K5651-34370 76539-3437-2 Compatible with Kubota ZD321 ZD326S ZD331 ZD21 ZD25 ZD22 : Patio, Lawn & Garden

www.amazon.com

Not cheap but not insane for an unusual headed M12 bolt.

These are only grade 2. I don't know what the Kubota's are. Some designs are design to shear, and some aren't.

All the best,

Peter

 

[B7510HSD]

Good Morning TBNers,
Ct, 59 to start going to 72 with mostly cloudy skies. I think most of the rain has passed by but not the clouds. I don’t think we got as much rain as predicted but we did get enough to forgo watering the garden and outside plants for another day or so. We also got a fair amount of wind but my antenna is still up in the trees so I guess it’s all good .

Looks like work this morning but only a couple of deliveries.

Phil, sorry to hear about your hand injury, hopefully that feels better soon. Every morning I wake up there is always something that hurts

On the radio front, I’m waiting on a coil for my whip antenna that will hopefully be delivered today. This will expand my band coverage to 40 and 80 meters for my portable POTA operation.

Steve, I see that you did a like on my post yesterday, so I really do want to try FT8 operation hopefully by this fall. And I still have the PM that you sent me on the cable connection between the transceiver and computer. I will need to pick that up. Was kind of wondering how the computer clicks get synchronized? But I’m sure I will at some point.

We have 2 of our grandchildren for an overnight stay this afternoon and night. Maybe we will take them to the carnival in a near by town.

Hope all have a blessed and safe day

Scott you can get the Drivers needed from Icom and install them once that's done plug the USB cable to the radio and PC and you will see Com Port for the rig.
Then you install the software you want to try (FT8) set it up with the Com port that was created in the PC. I use AnyDesk software for AFMARS and install and help many folks with that I can login and help if needed.(AnyDesk is free)

 

[kenmbz]

Morning all, 64 going to 75 and cloudy, feels downright chilly.
So total for yesterday about 1.25" , heard NYC got quite a bit and some flooding.

This weekend is my birthday, I will be as old as my mother when she died.

Be well,

The brothers, can see them getting bigger week to week.

 

[Buppies]

Here is pen

Happy Birthday Ken