Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 17052284
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,144
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
Happy Birthday to Dan scotty
38.1 low 37.2 high 59 today roller coaster ride coming up 60s to high 30s each day changes next week.
Hope you get the price you want Drew
Hope tooth gets better wagtail sounds like abscess.
Prayers for all silent or spoken our Country
38.1 low 37.2 high 59 today roller coaster ride coming up 60s to high 30s each day changes next week.
Hope you get the price you want Drew
Hope tooth gets better wagtail sounds like abscess.
Prayers for all silent or spoken our Country
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,338
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
riptides
Super Member
42 outside right now, heading to mid 50's.
Glad the week is over. Pretty tough on the real jobs. Looks like next week will be continuing the work loads. Schedule booked out already. More city time.
Got my errands done. Took the better part of the afternoon. Scored on beer and lamb chops. Yum.
May get to more trees today. Why not. Weather may take another cold snap movement in a few days. Getting the trees out of the woods without greenery is a lot easier on everything, so might as well do it.
Hope all have a good Friday, a good start to the weekend, and a great weekend when it comes. Be safe.
Glad the week is over. Pretty tough on the real jobs. Looks like next week will be continuing the work loads. Schedule booked out already. More city time.
Got my errands done. Took the better part of the afternoon. Scored on beer and lamb chops. Yum.
May get to more trees today. Why not. Weather may take another cold snap movement in a few days. Getting the trees out of the woods without greenery is a lot easier on everything, so might as well do it.
Hope all have a good Friday, a good start to the weekend, and a great weekend when it comes. Be safe.
daugen
Epic Contributor
thanks
only had that happen once to me. Right at beginning of covid, rvs were sold out and dealer came back
to me and upped his offer on my MB based rv by four thousand. Almost put me back to original discounted cost new.
So I was happy to sell.
I have a very common motorhome, lots of them out there
I would like to get some equity out of it versus just padding the dealer's pockets.
Popgadget
Elite Member
Good Morning
38° with a clear sky and forecast high of 50.
Last two days were spent on the lathe project. I should have known that I was optimistic when I wondered if it would take a whole day……
Just getting cleaned up and moving it was a project in its self.
I ended up using the crown lift and some blocking.
Once it was pulled out of the wall and the splash shield removed, I set up a table behind it to work from.
Using a dial indicator on the carriage, I was able to get the scale to within .001” in all axis. That was tighter tolerance than required, but I had a hard time getting the reader to work properly, until I realized that I misunderstood the directions and had it upside down. Im sure that I could have gotten away with much looser tolerances if I had done it right in the first place.
At the end of the day, it was back in place, and everything works as it should.
Another example of how easy it is to make things hard. But it’s done, and I’m off to the next project.
Today I have to do a little woodshedding for tomorrow’s gig, I haven’t given it a thought all week, as I was busy with other “stuff”. Also want to keep feeding the 3D printer projects to run while I’m otherwise occupied. I’ve got drawings about a dozen projects ready to go.
38° with a clear sky and forecast high of 50.
Last two days were spent on the lathe project. I should have known that I was optimistic when I wondered if it would take a whole day……
Just getting cleaned up and moving it was a project in its self.
I ended up using the crown lift and some blocking.
Once it was pulled out of the wall and the splash shield removed, I set up a table behind it to work from.
Using a dial indicator on the carriage, I was able to get the scale to within .001” in all axis. That was tighter tolerance than required, but I had a hard time getting the reader to work properly, until I realized that I misunderstood the directions and had it upside down. Im sure that I could have gotten away with much looser tolerances if I had done it right in the first place.
At the end of the day, it was back in place, and everything works as it should.
Another example of how easy it is to make things hard. But it’s done, and I’m off to the next project.
Today I have to do a little woodshedding for tomorrow’s gig, I haven’t given it a thought all week, as I was busy with other “stuff”. Also want to keep feeding the 3D printer projects to run while I’m otherwise occupied. I’ve got drawings about a dozen projects ready to go.
Attachments
daugen
Epic Contributor
my pics of the day continued on the orchard theme
it was such fun planting in that sandy soil
you couldn't buy a rock and no roots.
I eyeballed those rows and got them pretty straight
Kubota was a joy to use
fun trip down memory lane for me
planting my own orchard had always been a dream
it was such fun planting in that sandy soil
you couldn't buy a rock and no roots.
I eyeballed those rows and got them pretty straight
Kubota was a joy to use
fun trip down memory lane for me
planting my own orchard had always been a dream
Looking4new
Super Member
- Joined
- Apr 8, 2012
- Messages
- 9,844
- Location
- Northern Ontario, Canada
- Tractor
- 2012 Kioti CK27HST w/cab
Good morning, the low is 3 and going to a high of 12°F. Wind NNE 2 mph. Snow! About 8" or so.
I WILL be plowing tomorrow.
Just to spite me yesterday suppertime, my 4 year old tomcat was mooching as usual and I told him he wouldn't like my bar-b-que ribs. I gave him a little taster and be dammed if he didn't eat it and want more. The 12 year old tomcat tried a little taste, sneezed and left the kitchen.
I don't think I will be doing much of anything today. Tomorrow, IF I remember I will take a video of the biggest snow pile I have.
Have a safe day all
I WILL be plowing tomorrow.
Just to spite me yesterday suppertime, my 4 year old tomcat was mooching as usual and I told him he wouldn't like my bar-b-que ribs. I gave him a little taster and be dammed if he didn't eat it and want more. The 12 year old tomcat tried a little taste, sneezed and left the kitchen.
I don't think I will be doing much of anything today. Tomorrow, IF I remember I will take a video of the biggest snow pile I have.
Have a safe day all
Popgadget
Elite Member
There has been a lot of development around me as well. Fortunately for me, I’m surrounded on 3 sides by hundreds of acres of preserved farmland, the fourth side is the road. But with in 5 minutes, I can be stuck in traffic looking at 4 story luxury apartment buildings being built.
The only real upside to the urbanization is that I can leave my oasis and be in a grocery store in 5 minutes or so with only one stop sign to impede my progress. Lots of choices of restaurants, a Wawa, a large new hardware store (that unfortunately doesn’t have number drills, but has a great selection of Yeti tumblers).
The only real upside to the urbanization is that I can leave my oasis and be in a grocery store in 5 minutes or so with only one stop sign to impede my progress. Lots of choices of restaurants, a Wawa, a large new hardware store (that unfortunately doesn’t have number drills, but has a great selection of Yeti tumblers).
m7040
Elite Member
- Joined
- Sep 15, 2006
- Messages
- 3,645
- Location
- Frederick maryland
- Tractor
- Kubota M7040, MF 203 industrial, ZD331, RTV 1100 , Kubota Minix excavator, Unimog 404
good morning, 38 going to 51 partly cloudy
Walked Cody, made coffee and fired up. Will work on the finger flexing some more as this now is a daily routine
Plan to gather with family at a local restaurant to celebrate wife's birthday today
Walked Cody, made coffee and fired up. Will work on the finger flexing some more as this now is a daily routine
Plan to gather with family at a local restaurant to celebrate wife's birthday today