Good morning!!!!

   / Good morning!!!! #200,551  
Good evening Buppies. Long day here too spread 23 bags of mulch and got 3 sides done. Also the last batch of epoxy I did last night for the shower did not set. I either used all of B and no A or I had the proportion way off. Had to scrape it off and start over. Still can't figure what I did wrong but tonights batch is staring to harden already. Oh, high today was supposed to be in the 60s it was 81˚F. Advil night.
 
   / Good morning!!!! #200,552  
Well, the Snow engraven Hearst near our cottage finally quit, after dropping almost 5 feet! I’m here. I am stuck recovering from the surgery when I could be out with the tractor playing in all that stuff.😢

Oh well, the winter is still young yet. And I will be up there again, perhaps as early as Christmas.
 
   / Good morning!!!! #200,553  
Good evening all. 60ºF for the start, overcast, .1 inch in gauge, light wind. Light wind day, sky cleared off about 10AM, and high temp was 69ºF. made coffee to start day, bike ride 65+ miles. Nap after lunch, Subway for dinner.
Ron glad you were able to conserve energy yesterday and hope you can continue the trend. Nice squirrel. I understand now.
Drew good to hear progress on shelves. Hope brunch was good. Thanks for keeping in touch with Ted and Donna. Hope plowhog alright.
Thomas hope puttering went well, was rooting for Navy.
Frits sounds like you are having fun getting max heat from stove. Can you get rebuild kit for carb? Many shops don't rebuild card due inconsistent results. You might consider replacing fuel lines and tank filter.
Bill that cold, I wouldn't go outside it I didn't have to.
Dennis it also depends on comfortable seating position. I am 6 ft and usually have all the back or nearly so.
Mike moon is awesome here tonight too overcast last night to see it full strength. Sorry light had issues after hung. One bad string here but it showed on ground. Replacement here and will get hung tomorrow. Roof not my favorite place to hang lights from, but since no lift, don't have a better choice.
Dennis neat pic. glad geo units keeping up again. Nice fox pic
Billy was careful, and didn't fall off, and did not feel like was about to fall off either.
Billy thanks for taking and sharing pics of homestead.
Mike thanks for sharing wife's moon pic.
Scott(vt) hope you got your walk in. Have fun cooking breakfast for children's Christmas Party.
Buppies glad house staying warm. Hope work went well and no crisis at home. prayers sent.
Don hope you got the mulch spread. Hope all holes are now sealed. Congrats on only 2 more weeks of PT.
Ken glad dog like the cold. Glad you were able to work on paperwork while wife shopped. Did not know corgis were herders. Nice pic of MiniBuck.
Paul glad Lexus worked out, hope paperwork can be worked out and you get stickers.
Drew travertine is interesting stone.
Drew been seeing clips on NJ drones.
RNG not sure who to call either on drone flight. Cat and electric blanket sounds warm.
Lou thanks for clarification on where Prius small.
David great news on Sophie's eyes. Hope ribs turn out good. Sorry about rain.
Drew glad breakfast good and she liked flashlight and all it's features. Sorry about motivation MIA.
Dennis cool collection of music magazines.
Drew I believe some of the cost is due to remoteness/ruggedness of the stretch of I-40.
Bill thanks for info on I-49 construction.
Randy(wag) glad good Christmas BBQ. Good news all is well. Hope church and BBQ was good.
Ron sorry about the weird stuff. To bad they didn't include info on how to use AI.
Phil Why so many chucks? on our metal lathes had a 3 jaw and 4 jaw chucks.
Dennis thanks for info
Lou too big for my 1/3 of an acre, Was too big for previous 3 acre lot as well :) Nice looking tractor
prayer for all, especially Jay/Peg, Kyle /Daughter, /mom's breathing, /son's migraines, Bird /aging issues,Mike /BIL in FL, Ron /heart, David(moss) /remodel, /divorce, Buppies /cancer,parathyroid,blood sugar /wife, Thomas /gout, Phil /reflux, Frits /veteran son with mental issues, /granddaughter with Evans Syndrome, Ken /dad dementia, /chronic fatigue, Diet not working, Randy(wag) /sister stoke, Steppenwolfe /son-auto immune disorder, Grev /wife's eye, Ted /knee recovery, /retirement & disability red tape, /family issues, /wife back issues and cancer, Lou /eye issues, /heart issues, /wife hip replacement, Doug and wife/health issues, / hand nerve and surgery, /fall and recovery, / wife headaches and heart eval, / David(sadamo)/Sophie's hip or leg pain, /back issue, Scaredy/shoulder dislocation, /marriage dissolving, / friend stop drinking, Dennis /retirement, /neighbor issues, /brother's lymphoma, /dad surgery recovery, Drew /back operation issues, /friend's wife cancer diagnosis and recovery, Scotty /back pain, Helogabals /wife's friend situation, Fatjay /father broken hip, Israel, Ukraine war, hurricane victims, and Country.
 
   / Good morning!!!! #200,557  
Well, the Snow engraven Hearst near our cottage finally quit, after dropping almost 5 feet! I’m here. I am stuck recovering from the surgery when I could be out with the tractor playing in all that stuff.😢

Oh well, the winter is still young yet. And I will be up there again, perhaps as early as Christmas.
Oops! I meant Gravenhurst, a town up in cottage country North of Toronto.

Anyway, I have never seen that much snow come down at once in my life. Sorry I missed it!
 
   / Good morning!!!! #200,558  
good morning all
16 going to 39 today, temps slowly rising with wet weather returning
looks to be a cold Christmas; one can always hope for a dusting of snow Christmas eve.

up too early, coffee going down nicely.
bright moon and twinkly stars will be replaced by clouds soon
 
   / Good morning!!!! #200,559  
Coffee is done brewing. 31° with freezing rain this morning. Heading to 40° with rain most of the day. .03 rain so far today. Got another day of energy conservation in yesterday. Should be able to get some things done in between raindrops.
Got a picture of December Cold Full Moon before clouds moved in yesterday evening.
0k7FtQW.jpg


Prayers and best wishes for everyone.

Good Morning All.
 
   / Good morning!!!! #200,560  
Phil Why so many chucks? on our metal lathes had a 3 jaw and 4 jaw chucks.
Easier to swap out chucks then to change the jaws. Wood chucks only have a little travel. When going to different diameters you need to change the jaws(8 screws) or swap the chuck.( 1 big screw).
Morning all!
Currently a very chilly 9 above!
Will be keeping the pellet stove filled!
Need to change the oil in the nephew's car today. Glad I have the salamander heater in the storage building!
Sister should be visiting for a few hours. After that who knows. Maybe play in the shop.
One project didn't go as planned yesterday! It happens. Lol!
IMG_0069.jpg

Hope everyone stays safe and healthy!
 

Tractor & Equipment Auctions

2019 Bobcat T770 Two Speed Compact Track Loader Skid Steer (A50322)
2019 Bobcat T770...
2013 INTERNATIONAL WORKSTAR 7600 SBA 6X4 DUMP TRK (A51406)
2013 INTERNATIONAL...
197637 (A50459)
197637 (A50459)
2014 Volkswagen Passat Sedan (A50324)
2014 Volkswagen...
2018 WACKER NEUSON CORPORATION DBA WACKER NEUSON LTV6 LIGHT TOWER (A50854)
2018 WACKER NEUSON...
1998 Dorsey Trailer, VIN # 1DTP16K29WG052604 (A48836)
1998 Dorsey...
 
Top