Good morning!!!!

   / Good morning!!!! #160,241  
Question on a battery chainsaw. Which size would you recommend? 14" or 16"?
 
   / Good morning!!!! #160,242  
Good morning to all! Low of 34°, going up to around 50°. Changes are expected over the next couple days.... highs dropping into the low 40's, lows into the low 20's, chances of light rain / snow.

Don't know what happened to a post here yesterday...... just disappeared....

Anyway, today's agenda is multiple errands.... the PO, then Costco, then Wally World.... hopefully won't be too busy on a Tuesday morning.....

I need to get into the shop and finish a project that I started last winter.... bucket "Edge tamers". They were 80% done last winter, but then got put aside being that winter was over.... basically forgot about them on the shelf until a few days ago.... all bends are made, small pieces cut, just need to weld together, then add my own "mounting system", utilizing the existing holes for the toothbar.
I'll be mad at myself if I don't complete them by the first heavy snow.....

Need to get going....
Everyone have a great day!
 
   / Good morning!!!! #160,243  
Question on a battery chainsaw. Which size would you recommend? 14" or 16"?
14" is plenty. My Dewalt is 12" and is real useful. The bigger stuff gets done by the gas units.
 
   / Good morning!!!! #160,245  
Good Morning - currently 50° going to 59° with rain later today

Thanks for all the info on chainsaws. Will look at u-tube video tonight to see what they have to say..
I currently do not own any battery powered tools. Everything is gas. Echo backpack blower & weedeater..Would not give up either one of these.. My gas saws are worn out and I don't need them much anymore..

Have a great day everyone..
 
   / Good morning!!!! #160,246  
Thanks for all the info on chainsaws. Will look at u-tube video tonight to see what they have to say..
I currently do not own any battery powered tools. Everything is gas. Echo backpack blower & weedeater..Would not give up either one of these.. My gas saws are worn out and I don't need them much anymore..
5 years ago I had all gas saws and trimmers. My right shoulder went bad. Probably from pulling start cord on my Stihl tools. Today I have a Extend It group of tools from Ryobi. I still cannot easily start a gas powered tool. All I have left with gas is a Echo blower and a Ryobi power head for the extend it tools. Very hard for me to start these tools. About ready to give them to my young neighbor.
 
   / Good morning!!!! #160,247  
Question on a battery chainsaw. Which size would you recommend? 14" or 16"?

14”. One thing you will learn about using a battery chainsaw is do not force it to cut. It will overheat the battery. I have 4 ah 40 volt batteries. By the time I get first battery discharged I need to take a break. I also have a pole saw that uses same batteries. I use it for trimming. Do not need to get close to a downed tree with it.
 
   / Good morning!!!! #160,248  
All my batteries came with Milwaukee tools so unless they are counterfeits they are OEM.
 
   / Good morning!!!! #160,250  
I use 16 inch on the Makita. I have the Milwaukee batteries from many tools but chose to go with Makita for chainsaw. It has its limitations and can plug up the chain if I push it and it is best for 12 inch or smaller branches. Always go with longer bars and learned to use them to balance with when space is tight around logs and branches. They provide good lean to support while moving around to avoid tripping. My Stihl is 20 inch and works good for that.
Ron my shoulder is bothering me also and pulling the start rope makes it worse. I don't know if I can get used to a left hand pull? Was hoping it would clear up with time but not so far
 

Tractor & Equipment Auctions

ECONOLINE TRAILER, INC (A50323)
ECONOLINE TRAILER...
2021 Club Car Carryall 500 Utility Cart (A51691)
2021 Club Car...
1998 INTERNATIONAL 9400 (A52472)
1998 INTERNATIONAL...
2014 Nissan Rogue Select SUV (A51694)
2014 Nissan Rogue...
2012 Honda Pilot SUV (A51694)
2012 Honda Pilot...
2020 Massey Ferguson 1840 Small Square Baler - High-Performance Hay Baler (A52748)
2020 Massey...
 
Top