Good morning!!!!

   / Good morning!!!! #120,881  
Yep, it is cold out here!.... the highest temp was that 19 this morning, dropped to 17 and stayed there all day... it is now 15, on the way down to 8 tonight. Snow finally arrived and is predicted to last until Wednesday morning. Maybe up to 18" of snow.

There is snow going further south to areas that rarely see just a few flakes, they might get 4-5".

Here's a pic from our front door... too cold to step outside

View attachment 674514

So, this 'day of relaxation' has been nice.... different, but nice! I reached the end of the internet and was told to go back.... then I burned out YouTube.... I don't know what I'll do tomorrow.....

I'll take the snow, but you keep the 8F. Stay warm!
 
   / Good morning!!!! #120,882  
My wife said she didn’t know it got cold in NM, I told her she’d obviously never spent the night in a stucco motor cabin with no heat, outside of Tucumcari in Late November. Thank goodness there were a lot of blankets.

When I went thru Tucumcari in June a couple years ago it was 100°
 
   / Good morning!!!! #120,885  
Foggy and 64 heading for 73 later, cooler weather and rain later this week. About half the leaves are down and they’re falling fast now. One more mowing at a lower level for the winter to avoid snow mold fungus.

My arm is much better, have follow up with the doctor Wednesday.

My fingers would lock after using an air jitterbug repeatedly. It also led to carpal tunnel surgery in 1986.

Ron, glad your arm is better. I’ve had mild soreness from vaccines, but very rarely.

I’ve noticed that shortages are starting in the grocery store again.

I sure hope the COVID-19 vaccine is soon to arrive.

Prayers for all.


Glad your arm is better.


David, you would not recognize I95 North from Route 1 to DC. Just North of 1, all the trees in the median are gone. And there is a reversible toll lane, run by an Australian company.

I would say, it doubled in size...easy. And it STILL has the same bottlenecks. Just a lot of people in the area.

Hope all have a great start to the work week. Be safe!

They should move the Pentagon to Texas, near Fort Hood where there is plenty of room and cheap housing. Get some congestion out of DC. No sense being in some extremely high priced area. I'm betting they have to pay all the staff a large cost of living bonus....

Good morning. It's a warm 73° with 92% humidity and our high will be about 82°. A "cooler" front is on its way, arriving here about 5 p.m. for comparison .. it's 19° in Amarillo this morning. And .. a tropical storm entering the Gulf of Mexico. The "cooler" front .. will keep it from coming our way.

I spent yesterday, on the New Holland, cutting one of our pastures. About two hours of cutting becomes 5 hours when your continuously dodging trees and low limbs.

Don .. I failed to mention yesterday, that the PR XP 1000 "Texas Edition" also includes a standard 4500 # winch with synthetic line. I used the 3500# winch, on our XP 700, quite a bit.

The 4500# winch is controlled from a dash mounted in / out switch and I can add an optional wireless remote control, for $135. That .. seems like a "no brainer".

Eric .. your "triple doink" was outdone by the Rice kicker .. with a "quadruple doink".

"On Friday I foolishly tripped over a brick in the dark in my haste to shore up some boards keeping rain off the fresh mortar. I stayed upright, however the plank of wood I was carrying took the opportunity to clonk me on foot, knee and forehead, all in one go "

Quadruple doink foils what would have been a game-winning field goal in OT for the Rice Owls - YouTube


Hope everyone has a great start to your week.

Prayers to all.

Might be a while until a game losing quintuple doink sets the new record.

You guys be sure to get your fingers limbered up before you drive through DC area, in case you have to signal someone they are #1. :)

Got a lot done on the GT80 mini bike. I know, I should have had it done by now. Clutch doesn't seem to be working correctly. I need to make sure the little clutch ball bearing is in place. I might have to take off the right side cover again. This is in no way any sort of a restoration other than put it together and let the kids thrash it. There is light at the end of the tunnel (I believe), in getting it going. It seems the piddly things take the longest getting it back together. I have a list of parts I need/want to get from Partzilla.

Don, this Steiner might end up being a "parts" machine if it has too much wrong with it. I can't find a service manual. Steiner website says "under construction" when you go to the support manual page. I guess I'll have to call them. I'm not even sure how to put the thing in neutral to hopefully roll it onto the trailer. Yes Ken, it's a dollar two ninety eight beauty queen. Maybe I'll grow to like it. I've just always heard good things about them.

LS, too cold for me. My friends are somewhere in the middle of nowhere in Utah right now, but they do have cell service.

A gal at work made some home made kolaches with jalapeno cheese turkey sausage. Really yummy. I only had 1 small one.

I warmed up some leftover sausage I bbq'd, and my wife and oldest daughter came out of the woodwork to get some. I had warmed up the last 3 pieces about 2" long, but they saved me from eating the other 2.

It only took 51F degree weather with 20mph stiff breeze, sitting on aluminum heat sink seats, to freeze us out the other night.
 
   / Good morning!!!! #120,886  
Thanks for all the feedback re my finger question. It would seem too many of us are afflicted, also some variety in results. And for those without, I seriously hope and pray you never do.

When I was younger (12-30 yr old) I used to crack my knuckles daily and I believe this is what has led up to my hand problem today.
 
   / Good morning!!!! #120,887  
Good evening all. 44f for the start, light rain, .1 inch in gauge windy. Windy day today, on and off rain, most still soaking in, and high temp was at midnight and was 49F. Low temp should be about the current 35F. Might get a window to ride bike tomorrow. First fire in insert today, pic below. Played with vents, trying to move heat from insert around house, some success. Cleaning lady prep today then tending insert fire, and helping wife make chicken and rice for dinner. Did get nap in as well as youtube videos :)
Covid update: Cooke unchanged, Montague unchanged, Grayson unchanged.
Phil, pressure washing in the rain, never tried it.
Drew, Good luck with election board, I can see where caffeine might affect some hormone levels
Rich hope phone duty goes well
Mike always nice to have the stove running. hope it warms up enough to get started painting
Buppies fish club has 13 tournaments in 10 months here 9 of them for largemouth
Ron congrats on getting areas cleaned up, hope the cellar project progresses. Nice sunrise
Billy what was the bug?
Thomas gotta conserve energy for the leaf work :)
Bill sounds like a nice putter day.
Don Much warmer than me.
RNG got to hear no fire issues, hoping you get rain soon. Hope you get some good sunlight for your projects
Ken, nice pic, glad leaf clean up under control
Randy glad arm is better, mowing is almost done for year.
Rick thanks for sharing the quad doink. I have not seen the pros do a double, let alone a quad doink, Should be points fo a quad doink :)
Ted uh not sure how toi tell you this, but relax mode is not about working :D
PJ good progress on fence line, nice to hear you got some studio time, hope you like the new guitar
Ted sorry about the cool down.
RS busy agenda hope it all goes well good news on the Covid case in Houston, hope the new case does not get bad.
Ted Nice snow pic, I never have reach the edge of the Internet, but Youtube will have new videos tomorrow :)
Kyle glad your wife and daughter saved you from the bbq sausage. Aluminum does transmit heat well :(
prayers for all, especially Drew/move, Jay/Peg, Kyle's daughter, RNG/fire, and Country/election
stay safe and healthy you all.
 

Attachments

  • 20201026_130637.jpg
    20201026_130637.jpg
    3.4 MB · Views: 105
   / Good morning!!!! #120,888  
Gee Ted, cold and snow already.
I’m staying here.
 
   / Good morning!!!! #120,889  
When I was younger (12-30 yr old) I used to crack my knuckles daily and I believe this is what has led up to my hand problem today.

I remember as a kid being told that would happen.
 
   / Good morning!!!! #120,890  
2020-10-27, 0308

38 right now...high in the mid-40's...

Calling for some snow on Friday...prediction's for 2" or so...nuisance snow. Think I'll put the blade on the Deere this afternoon
 

Tractor & Equipment Auctions

1986 ASPT 30ft S/A Pole Trailer (A51692)
1986 ASPT 30ft S/A...
2015 DODGE RAM 1500 CREW CAB TRUCK (A51406)
2015 DODGE RAM...
Swict Q.A 66" Bucket (A50121)
Swict Q.A 66"...
New Holland 939 3 Row Corn Head (A50774)
New Holland 939 3...
Tandem Axle Rear Truck Frame (A51692)
Tandem Axle Rear...
New Wolverine Skid Steer Hydraulic Breaker (A53002)
New Wolverine Skid...
 
Top