Good Morning!!!! 59F @ 5:15 AM. A mix of clouds and sun. High 83F. Winds S at 5 to 10 mph.
Condolences for your horse, Rip. It sounds like she led a long and happy life.
You have a very trusting neighbor, Ron! That's an awful lot of CoVid-19 cases.
Happy hunting on your shopping trip, Bill.
Hopefully the tests will shed some light on what's going on, Drew.
Beautiful pine woods, Buppies. Looks very peaceful.
Didn't find any loose lug nuts on the tractor, but the tires only had about half the air pressure they should have. No wonder it was wallowing around so much. The big tires on the back took so much air, I had to go get a stool to sit on while they filled. Found the backup beeper on a parts diagram, then found the lead that powers it and disconnected it. No more beeping.:thumbsup:
Stump removal went well, this 'hoe is a lot stronger than the old one, but it still took some digging to get the stump to let go. It easily broke through 2" roots, but I had to work out from the tree when it got to anything bigger. Still, in a little less than an hour, the stump was out and the hole was filled. A similarly sized stump took three days with the old 'hoe, and I still ended up burning it out in the end. Just need to get used to the controls, and avoid big in puts that move the tractor around. By the time I was done, there was a five foot drag mark from the FEL bucket. That backhoe sticking up in back makes loader work on a hill a little precarious at times; I wonder if I can fold the dipper stick and lay the boom down to get the CG lower?
After lunch, I took the bucket off the FEL and tried to mount the forklift tines, but the quick attach on the forks wasn't cooperating. It seems I made the slots at the bottom a little too short front to back, and had to spend some time grinding them wider. Then the latches on the tractor quick attach were rusted and sticky, so they got polished with a flapper wheel and a generous dab of grease. Once the forks were on, though, it didn't take long to get the 12" trenching bucket unloaded from the van and mounted to the backhoe. It was as easy as it looked in the video, and no damage to the van.
For Ted:
Finished up the day digging more out of the pumphouse trench, dumping the dirt into the side-by-side Kubota and ferrying it to one of the piles. Really nervous about the tractor getting pulled down the hill, so went slow and took small bites. Still had one pucker moment where I just had to stop and let go of the controls until I could figure out what was going on. Got another six or so feet dug, and no sign of the conduit getting any shallower or changing direction. It's at about five feet down now.
The best part of the day was not having anything break on this new tractor. Finally feel like I'm making some progress, and seeing a little light at the end of the tunnel. Or should I say trench?:confused3:
More digging is on the agenda for today. Still haven't heard from the local Kubota dealer on the old tractor, and the one in Oregon hasn't called back, either. Business for them must still be good for them to be that busy.:confused2:
Hang in there, gang, Friday' comin'!