Good Morning!!!! 71F @ 8:00AM. Plentiful sunshine. High around 90F. Winds NNE at 10 to 15 mph.
We've been under a Red Flag Warning since 5AM, with gusting winds and very low humidity predicted for later today and tomorrow morning. I've been getting blackout alerts from the electric company for the past two days, so it's just a matter of when, not if, the power will go off today. Brought home enough beer from Costco yesterday to completely fill all the empty space in the fridge; all that thermal mass will keep it cool tonight when the generator's not running. I won't run a generator when I'm sleeping because I don't like the idea of possible CO poisoning. There are much better ways to die than that.
Ain't nature great, Houser? How lucky you were there to see her strut her stuff, and thanks for sharing!
My bodyshop neighbor recommended a hydraulic shop in town to get the backhoe hose repaired, and gosh, did he pick a winner. It was in an older building in an area of town with lots of repair and industrial stuff, the kind of place with a big counter on one side and shelves and shelves laid out so customers could browse for fittings and a million other things while they waited. The man behind the counter disappeared into the back where the shops were located, and I told him I was surprised he was going to check the hose while I waited. He smiled and kept on walking. I could hear the pumps running while he made the check, and then I heard him hand the repair off to another fellow. In ten minutes he was back with a completely new hose, fittings and all. He told me it used British fittings, another surprise as it came off an Italian Nardi backhoe. :confused2: :dance1:
As I was getting ready to leave for town yesterday, I was looking around the garage at four motorcycles, each with a nearly empty fuel tank. With all this blackout business going on, and wanting to keep extra gas on hand, I decided to empty all my 5 gallon cans into the motorcycles, so they'd all be full of stabilized E0. Then I loaded 27 1/2 gallons worth of empty cans into the truck, and got 'em all filled up at the fuel depot. Also got the 5 gallon bucket for hydraulic fluid filled, so I can get the backhoe going again. I also picked up the repaired cylinders for the white bike while I was in town, and now it's loaded on the lift so it can be put back together. Good thing I don't have anything else to do...:confused2:
Just one question for you guys out there using StarBrite fuel stabilizer: What do you use to measure the correct amount to put into the tank? The last bottle of Stabil had a handy measuring spout built right in, but the StarBrite bottle is opaque with no markings. Last time I used one of those big veterinary syringes, but I don't think the needle I have is long enough to get to the bottom of the bottle. Guess I'll be pouring it into a tin can...
Happy Hump Day, folks!