check
Elite Member
- Joined
- Sep 26, 2008
- Messages
- 4,159
- Tractor
- 2009 Kubota BX25
Good morning all! First cup of coffee was a bit too strong - had to soften it up a bit with a wee drop of Baileys. Thanks for the compliments on the garage siding, guys. As we get near the gable ends, the job becomes tougher because of the angles for both sides on every row. Also, the furring strips need to be at least 16 inches apart, and the back up two by threes on the inside gable end trusses are 24 inches apart. So, I have to go in and cut vertical two by fours at the 1 foot spacing, and screw them on the inside of the plywood. More angle cuts!
Meanwhile, we had a frost advisory last night, and it was barely above freezing this morning, and yet they are saying it’s going to get up to close to 100° later this week with the humidex(!) I will believe that when I see it.
Meanwhile, we had a frost advisory last night, and it was barely above freezing this morning, and yet they are saying it’s going to get up to close to 100° later this week with the humidex(!) I will believe that when I see it.