Good morning!!!!

   / Good morning!!!! #91,042  
2019-03-22, 0336

33 right now...high in the upper 30's. Forecast is for 5-8 inches of snow...or, 6-12...depends on which one you want to believe. I hope it's the lower prediction. This one is going to be wet and heavy...:(
 
   / Good morning!!!! #91,043  
I tried going out without a jacket again this morning and soon cut the walk with Max short, the wind is just a little too searching.

Bups, it's good that you have a doctor you have lots of confidence in. As part of taking it steady, maybe limit your plinking this year to a .22, instead of the .700 Nitro Express ;)

Drew, to be told you have Meniere's on top of your other aches and pains must be a blow. It is not something I am familiar with, I've had to do some reading this morning to find out more. Much of the advice talked about not moving the head quickly. You are an expert at being kind to your neck, so that's one big part of living with it that you already have mastered. Hope you have fun experimenting with lots of new recipes and also on the plus side - you are much less likely to ever get troubled with noisy neighbours :)
 
   / Good morning!!!! #91,044  
Just a little more winter for you Roy, go slowly and safely in that wet snow.
Here it's 47 going to 58 in bright sun, and a lot of wind, 20-30mph predicted all day.
Was hoping to burn the burn pile but not today. At least the wind will dry out the last of the lawn lakes.

Have some errands to run this morning, trip to drug store for a variety of things, and then home to work outside. Hope the dealer finally shows up with my new three point stabilizers today.

so if I were to ditch my conventional toaster oven for an air fryer/toaster oven, that isn't the size of the original Amana Radar Range, any suggestions? I don't have a lot of counter space so size is important. Do the combo units work as well as more single function air fryers?
Interesting that not one air fryer on Amazon is made by a company whose name I recognize, clearly all Chinese. Of course name brands come from there too. Changed oil on Kubota RTV 400 a few days ago and oem Kubota oil filter made in China.

Another large Chinese chemical company blew up yesterday with large loss of life. Happens with frequency, videos on YouTube are remarkable. Lack of safety standards blamed, no surprise. I never liked leaving the house with the old fashioned crock pot running, so I have concerns over fire safety on these things. Of course these air fryers are fast cookers not slow, right? Sure would be nice to make my own French fries from my own potatoes. Using a salt substitute now.

Mostly, during the summer when I sweat through two sets of clothes a day, I have to use some salt. Though now I'll be reading the labels on those sports drinks for sodium content.
 
   / Good morning!!!! #91,045  
43 high of 52 quite breezy today the poking and prodding has left my shoulder aching sleep not so much

Happy birthday buckeyefarmers father 95 is impressive

Drew prayers for you farmer Jay and LS hope you all heal quickly
 
Last edited:
   / Good morning!!!! #91,046  
Eric I do not foresee any shooting in my future
 
   / Good morning!!!! #91,047  
Hope your doctor appointment went well yesterday Buppies. :)
 
   / Good morning!!!! #91,048  
Thomas surgery to fix with work have to wait till upcoming December
 
   / Good morning!!!! #91,049  
33F upper 30's for high almost inch snow fell last night...on the border 1-3 or 3-6 inches. :(

Deer fed early and often last night could be of the storm.
No interesting plans for after work other than date night w/Mrs.
E muffin feed little critters slow roll to work.

Enjoy the day all.
 
   / Good morning!!!! #91,050  
30 is the temp now and the high is to be 27 °F. Wind NNW 15 gusting to 22 mph. Snowing as I type.

We've got about a half inch of snow so far and it is supposed to snow all day. The guessers are saying 2 cm/less that 1 inch. I will need to scrape all the honey combed ice and slop off the driveway today anyway. This snow just makes it easier to see where I have been.

The DIL wants me to chop 6" off her metal bed frame legs. That is the job for today.

Have a safe day all
 

Tractor & Equipment Auctions

Miller Pro 5200 Silage Wagon (A50775)
Miller Pro 5200...
1996 FORD F-SERIES FLATBED TRUCK (A52706)
1996 FORD F-SERIES...
2014 Ford Taurus AWD Sedan (A55853)
2014 Ford Taurus...
UNUSED AGT YSRT14 STAND-ON SKID STEER (A52706)
UNUSED AGT YSRT14...
2013 International TerraStar Enclosed Service Truck with Liftgate (A53422)
2013 International...
(2) CAM2 HI TEMP LITHIUM COMPLEX GREASE DRUMS (A54757)
(2) CAM2 HI TEMP...
 
Top