ronjhall
Super Star Member
Made it back from doctor. Other than couple of test Friday and Monday. I should be good to go. Oh and a pill a day.
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 19920507
ronjhall
Super Star Member
Find your welder in the garage and fix it. People are going to riot because the project stopped.
buckeyefarmer
Epic Contributor
Must be a union job.
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
Ron- It reads like good news. Good luck Friday and Monday.
Don- The best laid plans...... Things always seem to fail when there is an audience and a "peanut/popcorn" gallery watching.
opcorn:opcorn: Good luck with the rig "adjustments."
It made it to 34F here today. More driveway challenges are developing.
Don- The best laid plans...... Things always seem to fail when there is an audience and a "peanut/popcorn" gallery watching.
opcorn:opcorn: Good luck with the rig "adjustments."It made it to 34F here today. More driveway challenges are developing.
buckeyefarmer
Epic Contributor
Back from Dr, xray looked good. Now it's wait and see time again.
daugen
Epic Contributor
Buckeye and Ron, good news i hope and think.
got the chain harrow back on the original shipping pallet, a very odd skinny long pallet, not normal at all, and
was smarter this time and spent fifteen minutes adding another support to the pallet where the forks just missed a second
rung. Visions of great cracking noises...so I got it beefed up and then took it out to the field and loaded the chain harrow.
Tried to pull it by hand, what a joke, only threw out my back. I had kept the forks on so they came in very handy.
I was very pleased to finally read the tag on the chain drag harrow that I special ordered at Tractor Supply. My expectations were far exceeded when I saw the
size of the chains the first time. Well, it seems I have a very fine British harrow! Built in Halesowen outside of Birmingham and I even found the builder's small factory
on Google Maps. Seems I must have the Bentley of drag harrows...:thumbsup:
Attaboy TSC purchasing.
spent some time with both neighbors,my one neighbor and I agreeing that our other common neighbor was getting more pitiful all the time.
And my fireman neighbor is a distant relative of the Drunken Farmer and just wishes the guy would disappear. The farmer extolled today about something that would
make Roy smile, as he said the big farm that used to cover this whole area was called the plantation. Not that long ago...
The farmer said I could have all the land I wanted, which he had said before and I think I made some progress on his getting his prior tenant farmer back.
Overall a good afternoon in mid sixties sunshine.
Changed the fuel filter in the Gravely, sharpened the blades on the Cub Cadet LX2; fancy fab deck on this mower but the world's cheesiest blades. They must weigh a third of
my other blades. And the end was slightly worn off. I guess lightweight blades keep lightweight hubs running longer. MTD not at its finest. I did see its finest today at the dealer where they had the new professional grade Cub Cadet zero turns, with steering wheels. Super heavy duty large frame mower. I wondered quietly why they wanted $12k CC zero turn when they also sold Kubota zero turns. Well, Kubota doesn't offer a steering wheel... shoe for every foot I guess.
No Super A today, and they even admitted to a drip...whatever that is they intend to fix it and deliver tomorrow. I said not to rush, going to be pouring rain and the fields are so wet I can't use the thing anyway. Plus it's going to be really cold this weekend so not like I'll be riding around on that thing...once i figure out how to start it...
got the chain harrow back on the original shipping pallet, a very odd skinny long pallet, not normal at all, and
was smarter this time and spent fifteen minutes adding another support to the pallet where the forks just missed a second
rung. Visions of great cracking noises...so I got it beefed up and then took it out to the field and loaded the chain harrow.
Tried to pull it by hand, what a joke, only threw out my back. I had kept the forks on so they came in very handy.
I was very pleased to finally read the tag on the chain drag harrow that I special ordered at Tractor Supply. My expectations were far exceeded when I saw the
size of the chains the first time. Well, it seems I have a very fine British harrow! Built in Halesowen outside of Birmingham and I even found the builder's small factory
on Google Maps. Seems I must have the Bentley of drag harrows...:thumbsup:
Attaboy TSC purchasing.
spent some time with both neighbors,my one neighbor and I agreeing that our other common neighbor was getting more pitiful all the time.
And my fireman neighbor is a distant relative of the Drunken Farmer and just wishes the guy would disappear. The farmer extolled today about something that would
make Roy smile, as he said the big farm that used to cover this whole area was called the plantation. Not that long ago...
The farmer said I could have all the land I wanted, which he had said before and I think I made some progress on his getting his prior tenant farmer back.
Overall a good afternoon in mid sixties sunshine.
Changed the fuel filter in the Gravely, sharpened the blades on the Cub Cadet LX2; fancy fab deck on this mower but the world's cheesiest blades. They must weigh a third of
my other blades. And the end was slightly worn off. I guess lightweight blades keep lightweight hubs running longer. MTD not at its finest. I did see its finest today at the dealer where they had the new professional grade Cub Cadet zero turns, with steering wheels. Super heavy duty large frame mower. I wondered quietly why they wanted $12k CC zero turn when they also sold Kubota zero turns. Well, Kubota doesn't offer a steering wheel... shoe for every foot I guess.
No Super A today, and they even admitted to a drip...whatever that is they intend to fix it and deliver tomorrow. I said not to rush, going to be pouring rain and the fields are so wet I can't use the thing anyway. Plus it's going to be really cold this weekend so not like I'll be riding around on that thing...once i figure out how to start it...
Attachments
![IMG_0510[1].JPG](/forums/data/attachments/483/483616-9939fa65fc29b269e4507b324b47abe4.jpg)
![IMG_0513[1].JPG](/forums/data/attachments/483/483624-d0e3eef4a553790ff1da7534fbea7271.jpg)
txdon
Super Star Member
Two hydraulic hose leaking two trips to town
Bucket change out
24 grease zeros greased
Ready to start the countdown.
Bucket change out
24 grease zeros greased
Ready to start the countdown.
DABSGT
Veteran Member
Bird when you see the PCD have him also do an EKG, better safe than sorry. Area of the pain and comes and goes with activity would make me suspicious.
If it gets worse don't brush it off.
Thanks
txdon
Super Star Member
5:00 quitting time
txdon
Super Star Member
Overtime approved
Finally ground breaking
Finally ground breaking
Ed of all trades
Elite Member
You just about have it whipped. 1 or 2 more bucket fulls and a stiff arm and ........ :cool2:
Buppies, I knew you would not let me down.
Drew, Ideas, one of the things that makes GM so interesting.
Have a good evening. Ed
txdon
Super Star Member
30 min overtime still light going to try for another 30
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
Don- Awesome. Thanks for sharing. So what is going in the hole?
txdon
Super Star Member
Still going
txdon
Super Star Member
Still not budging, cold front has blown in calling it a day.
Peter 315
Super Member
Don't give up keep digging I'm rooting for you:thumbsup:
Bird
Rest in Peace
Sounds good, Ron.
I had to have Margaret to the surgery center this morning at 11 a.m., but they had 2 doctors, one representative from the company that sells the equipment, and I'm not sure how many nurses. Margaret also has "restless leg syndrome" but one of the doctors told me she kept moving around, so it took longer, but he says everything went well otherwise.
But I expected it to take an hour or less. Oh well, nothing unusual about my predictions being wrong. We got home about 4:45 p.m. I did more magazine reading today than I've done in my memory.:laughing:
sseelhoff
Veteran Member
Time to bring in the dynamite?
sseelhoff
Veteran Member
Prayers for Mrs. Bird and a speedy recovery.
DABSGT
Veteran Member
42 and rain roads will be a bit icy in the morning
Drew just be thankful it was the Orange Tractor and not that nice Farmall Super A that would have been a sin. Starting that A is easy Turn the crank.
BuckEye hope you start feeling better My kid brother had back surgery last April still has pain and therapy he needed major reconstruction.
Don I agree with Buckeye "OT" it must be a union job. Try pushing from the other side that you removed the dirt and snapped the roots less pressure and weight.
Toppop agreed backhoe's are fun but a mini excavator that's the ticket
Drew just be thankful it was the Orange Tractor and not that nice Farmall Super A that would have been a sin. Starting that A is easy Turn the crank.
BuckEye hope you start feeling better My kid brother had back surgery last April still has pain and therapy he needed major reconstruction.
Don I agree with Buckeye "OT" it must be a union job. Try pushing from the other side that you removed the dirt and snapped the roots less pressure and weight.
Toppop agreed backhoe's are fun but a mini excavator that's the ticket
Here are some similar links:
