GC2400 No Start

   / GC2400 No Start #1  

Kovats

New member
Joined
May 15, 2010
Messages
5
Location
Goderich Ontario Canada
Tractor
Massey Ferguson GC2400
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:
 
   / GC2400 No Start #2  
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:

PTO switch is off? Seat switch problem maybe??

df.
 
   / GC2400 No Start #3  
Ditto.... I'd definitely be checking all the interlock switches: seat, PTO, Hi-Lo-neutral, etc. Had that happen to me once- it was the hi-lo selector; it wasn't quite all the way in neutral.
 
   / GC2400 No Start #4  
The Wire under the Seat got pinched on my GC 2410 and it sounds very simular to the problem you are experiencing, so be sure to check if that may be an issue.
 

Tractor & Equipment Auctions

2007 Polaris Ranger (A50514)
2007 Polaris...
Caterpillar 303.5 (A50120)
Caterpillar 303.5...
Deere 302K (A50120)
Deere 302K (A50120)
Blue Bird School Bus (RUNS)(TITLE) (A50774)
Blue Bird School...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Heritage / Woods RD 72 3 pt Finish Mower (A50515)
Heritage / Woods...
 
Top