GC2400 No Start

   / GC2400 No Start #1  

Kovats

New member
Joined
May 15, 2010
Messages
5
Location
Goderich Ontario Canada
Tractor
Massey Ferguson GC2400
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:
 
   / GC2400 No Start #2  
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:

PTO switch is off? Seat switch problem maybe??

df.
 
   / GC2400 No Start #3  
Ditto.... I'd definitely be checking all the interlock switches: seat, PTO, Hi-Lo-neutral, etc. Had that happen to me once- it was the hi-lo selector; it wasn't quite all the way in neutral.
 
   / GC2400 No Start #4  
The Wire under the Seat got pinched on my GC 2410 and it sounds very simular to the problem you are experiencing, so be sure to check if that may be an issue.
 

Tractor & Equipment Auctions

4K SAND SEPARATOR (A52472)
4K SAND SEPARATOR...
1999 KENWORTH W900 TANDEM AXLE SLEEPER (A52141)
1999 KENWORTH W900...
Woods 3 PT Blade (A52349)
Woods 3 PT Blade...
Farm Star 4' Off Set Disk (A50515)
Farm Star 4' Off...
2020 Freightliner M2 106 S/A Dump Truck (A50323)
2020 Freightliner...
2024 Isuzu NRR 24ft Box Truck (A50323)
2024 Isuzu NRR...
 
Top