Farmwithjunk
Super Member
Never seen 'em with a bend (other than ones I've bent by accident 
) I've owned a couple 3000's and always used the straight "flat bar" type as is commonly sold at outlets like TSC.
) I've owned a couple 3000's and always used the straight "flat bar" type as is commonly sold at outlets like TSC.
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,709
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
His are bent a different way than we bend them!
GOOGLE with one of the part numbers and you'll find several people who sell them on line
I searched "C5NNN455B " and found several
GOOGLE with one of the part numbers and you'll find several people who sell them on line
I searched "C5NNN455B " and found several
SIDE NOTE>>>>>>>>
I googled both left and right, and went to the cheapest site. While there, I decided to order some additional parts. So I added several small parts; PTO bearing and seal, ect. Anyway, the parts came to about $90, which included 2 stabilizers ($48). At checkout the shipping came to a whopping $88! I went elsewhere and paid the $8 more for the stabilizers and shipping was $15.
I googled both left and right, and went to the cheapest site. While there, I decided to order some additional parts. So I added several small parts; PTO bearing and seal, ect. Anyway, the parts came to about $90, which included 2 stabilizers ($48). At checkout the shipping came to a whopping $88! I went elsewhere and paid the $8 more for the stabilizers and shipping was $15.