ford 2000

   / ford 2000 #1  

dave1952

New member
Joined
Apr 12, 2016
Messages
3
Location
geneva ohio
Tractor
1966 ford 2000
hi I am dave and I just joined this sight I have a 1966 ford 2000 and am rebuilding lift cover on the piston the shop manual says put on leather ring and o ring howerver the rebuilt kit has a plastic ring aleather ring and o ring when I tore down piston it has the plastic ringand not the leathe ring the book calls for what ring should I use thanks
 
   / ford 2000 #2  
hi I am dave and I just joined this sight I have a 1966 ford 2000 and am rebuilding lift cover on the piston the shop manual says put on leather ring and o ring howerver the rebuilt kit has a plastic ring aleather ring and o ring when I tore down piston it has the plastic ringand not the leathe ring the book calls for what ring should I use thanks

Most likely the plastic backup ring is a replacement for the OEM leather ring. Install it per the instructions.
 
   / ford 2000
  • Thread Starter
#4  
:anyone:hello Dave 1952 here got a little problem had to buy a new voltage stabilizer for 1966 ford 2000 old one has 3 terminals b and I on same double terminal the third terminal is marked with an E the new one has just 2 double terminals one set marked B the other marked I where do I plug the wire marked E lost:(
 

Tractor & Equipment Auctions

2019 Chevrolet Tahoe SUV (A50324)
2019 Chevrolet...
2006 Reelmaster Toro 3100D Mower (A50324)
2006 Reelmaster...
Mi-T-M AS6-HE15-120M 175 PSI Air Compressor (A50322)
Mi-T-M...
2015 Ford F-550 4x4 Knapheide Service Truck (A51692)
2015 Ford F-550...
2025 Swict 78in Bucket Skid Steer Attachment (A50322)
2025 Swict 78in...
2019 Ford F-350 4x4 Crew Cab AutoCrane EHCPRX 3,200lb. 1.5 Ton Crane Mechanics Truck (A50323)
2019 Ford F-350...
 
Top